Jump to content
SAU Community

Recommended Posts

R32 GTR Parts, If you want it or need it please make an offer!!!

- Front Mount, GTR BOV, etc. (Average Condition)

FMIC.jpg

- APEXi Struts (Adjustable)

Apexi.jpg

- Complete Interior (Excellent Condition) (Front and Rear Seats, Panels, Anything u need just ask)

- Stock BN32GTR Turbo's, piping, Dump Pipe, etc.

Turbo.jpg

Location: Gold Coast

Contact: Sam 0401723566

Edited by 7 Sins

Hey, I'm after a factory air box and factory piping from AFM's to turbos as well as factory piping from turbos to intercooler. You got any available and how much do you want? Can you do postage to melb?

Thanks...

Hey, I'm after a factory air box and factory piping from AFM's to turbos as well as factory piping from turbos to intercooler. You got any available and how much do you want? Can you do postage to melb?

Thanks...

Hey mate I will check through everything, I should have everything you need. let u know asap. thanks

Interior pics as requested.

Image014.jpg

hey do you have the rear quarter interior piece around the window (drivers side)?

Yes, have both of them.

hey mate ,how much are you after for the front seats.

Looking for around $700 but open to offers.

Thanks

What kind of condition is the interior panel like? How much you want for it posted to sydney?

Cheers!

  • 4 weeks later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...