Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

coool speed limiter removed

Nissan has changed the set up on adm, edm and 2010 us cars

euro very close to being finished and im sure ADM will follow shortly :P

Good stuff. Who is doing the work and are they only working on the UK cars?

  • 4 weeks later...
when's the ADM accessport coming out??

Just got mail today that Cobb should have the ADM version finalised next week...can't wait! Also got mail that the cat back exhaust adds next to no extra power (assuming the mid pipe and dump pipes are already in).

:D

The first ADM car was done during the week :)

Base stage 2 results were impressive but more work will be done to provide an even better tune for ADM cars in the next few weeks since these base results were not ideal AFR's (Very rich - so very safe).

But you can contact Ray at R.E.Customs or PM me if you want to get your hands on one.

;)

See below the results for the local ADM car with a mid-pipe installed before and after the stage 2 base tune.

post-64677-1247281621_thumb.jpg

The first ADM car was done during the week :teehee:

Base stage 2 results were impressive but more work will be done to provide an even better tune for ADM cars in the next few weeks since these base results were not ideal AFR's (Very rich - so very safe).

But you can contact Ray at R.E.Customs or PM me if you want to get your hands on one.

:P

See below the results for the local ADM car with a mid-pipe installed before and after the stage 2 base tune.

How come the car was recording only 260kw to start with?

I wouldn't be too hung up on what the number says as all dyno's read different and there are a zillion different other factors to consider. That same car might read 300 stock and 360 with the Cobb on another dyno.

But what needs to be looked at here is how much of an increase in power and torque there is over the base value given the same dyno and conditions. Very impressive given there's nothing else done other than a flash tune between the 2!

wow, I know all dyno's read differently etc. but still all JDM cars i've seen on various dynos read between 290 and 310, and all the ADM cars I've seen seem to be around the 270 mark. but with nothing fundamentally different between the models I would say you can get it back with tuning.

and I know of one car that tried the uni-chip and it actually worked quite well. this was a year ago though and there are definitely better solutions out there now. given how far things have moved since a year ago I would be looking at a cobb AP if you just want a very basic upgrade and leave it there, or the haltech platinum I reckon is the gun choice now.

wow, I know all dyno's read differently etc. but still all JDM cars i've seen on various dynos read between 290 and 310, and all the ADM cars I've seen seem to be around the 270 mark. but with nothing fundamentally different between the models I would say you can get it back with tuning.

and I know of one car that tried the uni-chip and it actually worked quite well. this was a year ago though and there are definitely better solutions out there now. given how far things have moved since a year ago I would be looking at a cobb AP if you just want a very basic upgrade and leave it there, or the haltech platinum I reckon is the gun choice now.

My ADM R35 put out 295.5 on the dyno at 12 pounds. I'd be interested to know what the boost was on the car that had the Cobb installed.

Cobb has had quite a jump on Haltech, has been widely used in the US, and has a proven track record. Will be interesting to see the results with Haltech over the next few months.

  • 2 weeks later...
My ADM R35 put out 295.5 on the dyno at 12 pounds. I'd be interested to know what the boost was on the car that had the Cobb installed.

Cobb has had quite a jump on Haltech, has been widely used in the US, and has a proven track record. Will be interesting to see the results with Haltech over the next few months.

just wondering what people are doing regarding factory warranty?

can we just reflush before services or would they be able to find out?

Guys just found the Sydney dealer for Cobb. Their called MPS Garage, any one heard of them? i think they started off just doing Mazdas but now do other makes.

they have supplied workshops in Sydney already and i've also been told they have some in AP's stock

http://www.mpsgarage.com.au/shop/product/1...accessport.html

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...