Jump to content
SAU Community

Recommended Posts

And for people who do not believe street rwd cars can be quick. Nizpro built a 200SX that did a 1:18.6 8 years ago. Still registered that probably weighed near std becaue of the cage etc

LOL, many, many moons ago... from the Maserati website :banana:

At the sharp end of the field it was a bit of an arm wrestle between Mike Roddy in his Jaguar XJS and Simon Gischus in his spectacular Nissan 200SXR...

There were of course quite a number of good performances on the day. 911 GT2 and Greg Lovett (1.22.65) in the Porsche GT3 were closely matched and Ben Derks (1:23.31) in his Nissan GT-R was close behind.

A little further back in the field there were also some good performances....as did Ray Evans in his Nissan 200SX. Times recorded by John Kennedy in the Mitsubishi GTO...were also impressive.

Some familiar names there. Good to see 8 years on that ppl are still playing with cars :banana:

  • Replies 269
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hang on ...300 at the treads and coil overs. So you are allowed a turbo upgrade (two of them) with ECU and exhaust with coil overs to go as fast as you are. But Tim in his GTSt isnt allowed a turbo upgrade and coil overs? :banana: You were also running better Federal tyres then what is on his car.

the point that i was making was you would need to spend more on a gts-t to get it to do a quick time.

for example, you want to run a 1.25 at sandown. you wouldnt have to spend anywhere near as much on a GTR as what would be needed to spend on a gts-t. mainly because the GTR's are already half way there in the performance from factory...

and what do you mean i was on "better" Federal tyres than Tim? how so? :banana:

And for people who do not believe street rwd cars can be quick. Nizpro built a 200SX that did a 1:18.6 8 years ago. Still registered that probably weighed near std becaue of the cage etc

LOL, many, many moons ago... from the Maserati website :banana:

Some familiar names there. Good to see 8 years on that ppl are still playing with cars :banana:

Awesome car... if only mine would be as quick one day!

http://autospeed.com/cms/A_107989/article.html

the point that i was making was you would need to spend more on a gts-t to get it to do a quick time.

for example, you want to run a 1.25 at sandown. you wouldnt have to spend anywhere near as much on a GTR as what would be needed to spend on a gts-t. mainly because the GTR's are already half way there in the performance from factory...

and what do you mean i was on "better" Federal tyres than Tim? how so? :banana:

LOL, its time to rev up more GTR drivers. :banana: When i have seen Tim run he has always had odd from to rear tyres that were nothing special. That may not have been the case, i just assumed so. I guessed when you posted that you ran Federal tyres that they were 595s which are good street tyres, people run them in the street class at Superlap,

I do agree, that an out of the box GTR with bolt on upgrades and coil overs with 250rwkws is a good thing. The only real downside is the inadequate brakes and how hot they run with coolant and oil temps. But they are quick things...didnt Scotsman do a high 1:21 or something with nothing too crazy in the area of bolt ons and still std turbos? That is my target, i hope to be able to do about the same times as a well sorted std turbo/engine GTR in a GTSt with about the same power, ie 250-260rwkws. I am hoping that the low speed traction advantage of the GTR equals out with the better power to weight of the GTSt and better braking and corner speed

I will add that my GTSt did sub 25s with an adpator allowing me to run 324mm rotors, a used turbo setup, Power Fc with the usual exhaust, filter and cooler mods and with off the shelf Whiteline shocks and swaybars. It did a 1.23.1 to br exact using RE55s. So the difference in mods is really the turbo setup and intercooler, easily cheaper then the purcahse price difference between a GTR and GTSt.

LOL, i will defend the broken ass POS GTSt to the death :bunny: Until Aaron, Chris and JFK chime in with the times their near std GTRs did at Sandown and PI then i will go to my cot and have a cry :rofl:

Gah silly argument. GT-Rs and GTS-ts are so different in terms of weight and philosophy! Jack's right about just getting out there and having fun.

Still I'm only down to a 1:26.6 at sandown with 245rwkw reduced by some very average misfiring coil packs. I'm waiting for a drama free run, I can't seem to get one at sandown.

Gah silly argument. GT-Rs and GTS-ts are so different in terms of weight and philosophy! Jack's right about just getting out there and having fun.

There you go. I obviously cant say it better myself as i have been offling on for pages! :P Different cars that are both fun that can achieve similar end.

I was running ok streets at sandown, hankook fronts and used toyo proxies4 on rear.

Keen to see my times once i settle the rear , change a few suspention settings and get semis on there.

And if I cant nip at your pb bris I will be an unhappy boy.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...