Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Hi guys.

Just came here looking for some decent suggestions on P-Plate legal cars. I want something that looks nice and has a bit of grunt too for around the $10k mark. I've been looking at N/A R32's and new model Preludes, but I'm really unsure.

Thanks guys.

NA R32's are very, very rare, and of the few that you'll find they'll be in such poor condition it's not worth it.

R33 NA's are everywhere, and perfect for your price range.

You'll also find NA 300zx's, NA S13s, older Impreza's, Soarers, Beamers, and as you mentioned Preludes.

Personally, R33's are an awesome first car, and probably the most reliable of above mentioned.

Hi guys.

Just came here looking for some decent suggestions on P-Plate legal cars. I want something that looks nice and has a bit of grunt too for around the $10k mark. I've been looking at N/A R32's and new model Preludes, but I'm really unsure.

Thanks guys.

http://www.overclockers.com.au/wiki/Fun_P_plate_legal_cars

That list is a little dated, so the prices are going to be slightly cheaper.

Get a corolla... zippy and awesome on fuel.

They are zippy and good on fuel and you'll never find a more reliable car. But at the same time I've never liked small cars, they always seem to be working hard. I've always prefered to lazy torque of a six, driving up to sydney feels so good to be able to just reach 80, put it in 5th and the car just pulls itself up the hill (coming from Wollongong). But at the same time nothing makes you feel more like a rally driver than having a 2litre four screaming while going through the twisties.

Edited by JarRah

R31 5 speed. quick enough for 1st car, fun, tons of parts, cheap as chips....

Who needs a 10k first car?

R31 - 1500

Minispool - 100

advance timing, good service etc

Hours of fun for the whole family :)

Your 1st car needs to be something cheap you'll never forget, be a load of fun & that wont send you broke if you wack it.

My answer to your question is the following:

Series 3 Manual R31 GXE Wagon with:

-4:11's

-H/D Clutch

-Minispool

-Shortened shocks with custom stiff springs

-BBS 17s all round

-30mm bolt on spaces with bolt on flared guards

-Mattress in the back for your mrs/random girls :)

I had a similar setup VN wagon, and it will be one car il never forget. ;)

Edited by Dean_HR31
They are some seriously boring suggestions for a first car... lol

Take my advice & ull have stories to tell the kids one day lol

The corolla is a boring idea, the SSS is pretty good. Otherwise he could just find a VP commodore slap some stockies on the rear and save the other $7000 for the diff replacements and traffic fines.

You dont need a mattress in the back of wagon for ya missus or ya best mates little sister there are many places you can go for that sort of thing.

Thanks for the suggestions guys, I'll start looking around at all of them, and see what's available on carsales etc.

i will have a n/a r32 up for sale soon once i fix up the paint a little and get off my ps it will be in pretty good condition.

And throw some pics up mate so I can have a look see. That'd be great.

Also, keep the suggestions coming guys.

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...