Jump to content
SAU Community

Recommended Posts

I found this on ebay, Link

IMO, you can add an RB26, and even an Autech kit (which this one doesn't have) but that still doesn't make it an Autech Stagea. its along the same lines as putting an RB26 and a GTR kit on a GTST and passing it off as a GTR, its wrong.

also, i didn't think you could comply a car that has had an engine conversion :D

oh that looks neat. very sleeperish ....

but yeah, chasis modifications for inlet pipe would be a pain to pass over here with the AIR BAGS cumple zone :S

and might of listed it as AUTECH, with that cheap price it catches peoples attention ... got yours right ? now your advertising for him. i think his sneaky plan worked

and might of listed it as AUTECH, with that cheap price it catches peoples attention ... got yours right ? now your advertising for him. i think his sneaky plan worked

not exactly what i was getting at but you have a point. lol

but yeah, chasis modifications for inlet pipe would be a pain to pass over here with the AIR BAGS cumple zone :S

I am pretty sure Autech stagea starts off as a standard RS4 Rb25det and gets replaced by a rb26 in the autech factory.

Need someone to check their genuine autech and have a look at the engine plate tag. I think it is still listed as a RB25det

I have only ever looked at one genuine autech engine bay and it had a hole hacked thru the chassis for the intercooler pipe.

Did not look very "factory"

I might be wrong.

AFAIK, they start off as a standard shell, but have structural changes made before assembly. I seem to recall seeing something on an Autech brochure showing extra reinforcing around the C pillar, not to mention bolt-on braces under the floor. The marketing hype has had the desired effect here, that's for sure.

My Autech had no extra bracing around the "C" pillar, i was under the impression there was something there to but nothing. All the bracing under the floor bolts striaght up to a standard RS4.

The holes for the intercooler piping on mine had been done with a hole saw and a drill, nothing to rough about it. We just did the same with the swap. There was alot of mods to the panel under the rad support that i could see, little trimming and enlarging of holes, also the ends of the chassis rail are trimmed back for the blow off valve return pipe.

None of it looked "aftermarket" was all done like factory.

And yes all autech's are plated as a RB25.

post-11869-1239925656_thumb.jpg

Edited by msports180
My Autech had no extra bracing around the "C" pillar, i was under the impression there was something there to but nothing. All the bracing under the floor bolts striaght up to a standard RS4.

The holes for the intercooler piping on mine had been done with a hole saw and a drill, nothing to rough about it. We just did the same with the swap. There was alot of mods to the panel under the rad support that i could see, little trimming and enlarging of holes, also the ends of the chassis rail are trimmed back for the blow off valve return pipe.

None of it looked "aftermarket" was all done like factory.

And yes all autech's are plated as a RB25.

So when you run your Autech Vin number thru Fast, does it call up a Rb26 or Rb25?

Also it makes me laugh everyone is concerned about cutting a hole thru the inner guard for aftermarket FMIC when a ADR approved and complianced autech is done the same way, ie an after thought. Where as a factory built and design GTR has a reinforced extra peice of metal around the hole.

When you fast the autech vin its comes up with a little thing saying its an autech listed vehicle (this allways confuses the nissan parts person) and yeah lists RB26.

The autech's are the same as GTR's to where it goes thru the guard in the way that the piping dosnt just pass thru, there is a part that actually bolts in place, a hard pipe, so this will add some strength to that area.

I am pretty sure Autech stagea starts off as a standard RS4 Rb25det and gets replaced by a rb26 in the autech factory.

Need someone to check their genuine autech and have a look at the engine plate tag. I think it is still listed as a RB25det

I have only ever looked at one genuine autech engine bay and it had a hole hacked thru the chassis for the intercooler pipe.

Did not look very "factory"

I might be wrong.

check out the engine plate on this autech for sale. . . . i was reading OPTION mag once and said that some have KAI written on the plate some where , but forgot there reason for during so, somthing to do with modifications ....

post-a203794-DSC00204.JPG

Geez, I'd even be nervous with a legitimate one if I was pulled up by the boys in blue and they challenged the build plate-vs-fitment...

I've always wondered 'how' some of the modified cars get through - you know, high mount T88's etc...

what makes you say that Hugh?

Well it appears to have black face dials and I am under the impression S2 have white face. Correct???

Also there does not appear to be a pic of the rear end. And I wonder why??????

Looks sus, sounds sus and FEELS sus.

Also, I cant see too clearly but does it have RB26 on the timing belt cover????

Edited by 66yostagea
I am pretty sure Autech stagea starts off as a standard RS4 Rb25det and gets replaced by a rb26 in the autech factory.

Need someone to check their genuine autech and have a look at the engine plate tag. I think it is still listed as a RB25det

this is correct... my autechs plate had it listed as an RB25DET.

Autech is not nissan - they purchase the vehicles before making the modifications, including paint. This is why the only way you could get a Series one in manual, or in black, was to buy an autech.

Technically all autechs are Nissan Stageas with a lot of 'genuine aftermarket' parts. Intercooler piping hole on mine was definitely a factory cut job.

Series 2 autechs have white faced dials, series ones have black, and even have the window in the centre for the automatic gear indicator.

He's not trying to pass it off as an autech... 'this one has been fitted with the RB26DETT AS PER THE AUTECH...'

He's just got autech in the topic title to get hits from people who are looking for autechs.

Obviously the car is not one...

Well it appears to have black face dials and I am under the impression S2 have white face. Correct???

Also there does not appear to be a pic of the rear end. And I wonder why??????

Looks sus, sounds sus and FEELS sus.

Also, I cant see too clearly but does it have RB26 on the timing belt cover????

to me it look like it has white faced dials, also the seats are series 2 seats. i know you could change them but why bother. i don't doubt its a series two. i think whoever picks it up is getting a good deal, cheap RB26 manual converted stagea. the only thing that would bother me is as some have said, and thats what trouble you may get into with the transport department, will it need to be mod plated anyway?

Well it appears to have black face dials and I am under the impression S2 have white face. Correct???

Also, I cant see too clearly but does it have RB26 on the timing belt cover????

My S2 doesn't have white dials, but its a 25t X four, not an RS four

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...