Jump to content
SAU Community

Recommended Posts

I took my R35 out to Oran Park today, i was keeping a close eye on the trans oil temps. As has been discussed on threads hereabouts, the temps got to 120*c only after a few laps.

My dealer told me the other day "you'll never get to 120* don't worry" (when discussing the whole warranty thing in relation to track days).

- obviously they didnt push the car on their recent drive days

Anyway, how hot is too hot? and when should we be looking to replace the oil?

If i were to follow the dealer requirement, i would be changing the oil tomorrow costing the best part of $2k, which is ridiculous of course.

Thoughts?

Edited by LSX-438
Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/
Share on other sites

Brace yourself Duncan ;)

120 degrees you can get in a doddle....which is why we have products like WR35TM and WR35TC. The dealers know very little about how these cars peform on the road let alone the track. Pre Cooler we had seen 145C many times, and with a good fluid, there is no problem :)

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4538957
Share on other sites

Brace yourself Duncan ;)

120 degrees you can get in a doddle....which is why we have products like WR35TM and WR35TC. The dealers know very little about how these cars peform on the road let alone the track. Pre Cooler we had seen 145C many times, and with a good fluid, there is no problem :)

Thanks Martin. I have your oil sitting in the workshop ready to go in.

So anyway 120* is a big no no? I can get over 90* just in CBD traffic.

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539007
Share on other sites

Brace yourself Duncan ;)

120 degrees you can get in a doddle....which is why we have products like WR35TM and WR35TC. The dealers know very little about how these cars peform on the road let alone the track. Pre Cooler we had seen 145C many times, and with a good fluid, there is no problem :)

Martin you have probably posted this somewhere before but have you a link from one of your sites or forums to your test results? how much were you able to control tranny temps?

Keep up the great work. I see you are gaining great popularity on NAGTROC... well done!

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539042
Share on other sites

I took my R35 out to Oran Park today, i was keeping a close eye on the trans oil temps. As has been discussed on threads hereabouts, the temps got to 120*c only after a few laps.

My dealer told me the other day "you'll never get to 120* don't worry" (when discussing the whole warranty thing in relation to track days).

- obviously they didnt push the car on their recent drive days

Anyway, how hot is too hot? and when should we be looking to replace the oil?

If i were to follow the dealer requirement, i would be changing the oil tomorrow costing the best part of $2k, which is ridiculous of course.

Thoughts?

lol, told ya they had no idea. as I said, 110 on the street is not too hard. 120 on the track is about 3 hard laps of oran park. as for what is acceptable and what isn't, martin would know better than me having actually tested the stuff. but I'd be cooling down if it gets to 130, then get back on it. the new fluid may help too, or at least it should have better film strength and maintain viscosity at a higher temp.

so did you have fun or what? 35 around oran park is a day well spent.

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539202
Share on other sites

lol, told ya they had no idea. as I said, 110 on the street is not too hard. 120 on the track is about 3 hard laps of oran park. as for what is acceptable and what isn't, martin would know better than me having actually tested the stuff. but I'd be cooling down if it gets to 130, then get back on it. the new fluid may help too, or at least it should have better film strength and maintain viscosity at a higher temp.

so did you have fun or what? 35 around oran park is a day well spent.

I had a blast, the R35 is a bit different to my monaro..... i managed a 1:17.5 so i am pretty happy with that.

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539313
Share on other sites

I had a blast, the R35 is a bit different to my monaro..... i managed a 1:17.5 so i am pretty happy with that.

very good time mate. 1:17 in a stock 35 with semis is well on the pace. ;) let me know next time you're heading out and I'll try and come out with something. :)

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539401
Share on other sites

Hi All

Has anyone tried the Willall fliuds yet?

Cheers

Mark

yep, russ put some in the JDM 35 I sold him and he is liking it. I'm sure a fair few people have used it by now.

My advice if you're picking up your new R35 there are 2 things you should get straight away:

1 : Cobb tuning access port

2 : mid pipe (and the willal one looks as good as any, and is made in aus and fair price too).

these 2 things are a great addition to any R35 GTR.

then after a bit of hard driving or a few track days change out the trans fluid for the willal stuff, and if you are planning more track work then consider investing in a trans cooler as well.

enjoy ;)

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539423
Share on other sites

yep, russ put some in the JDM 35 I sold him and he is liking it. I'm sure a fair few people have used it by now.

My advice if you're picking up your new R35 there are 2 things you should get straight away:

1 : Cobb tuning access port

2 : mid pipe (and the willal one looks as good as any, and is made in aus and fair price too).

these 2 things are a great addition to any R35 GTR.

then after a bit of hard driving or a few track days change out the trans fluid for the willal stuff, and if you are planning more track work then consider investing in a trans cooler as well.

enjoy ;)

Thanks Beer Baron.........

This is my first nissan (thought i may as well start at the top) ever.

What is a Cobb tuning port................. i currently run an Autronic ECU in my rex, but have not heard of this before

Cheers

Mark

Edited by Wild Thing
Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539489
Share on other sites

The Cobb AccessPORT is a flash tuner, it will rewrite the factory calibrations to give you enhanced power. It reflashes the factory computer. I dont think the aussie version is quite ready yet though, or at least the o/s versions havent been tested on ADM cars.

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539527
Share on other sites

yep, on top of being able to flash the ecu with different performance maps, it also has valet mode maps (ie rev limited etc), and it can clear any error codes without you having to take a trip to the dealer. and it will work 100% on aus models. snowy has one already. I know he used it on jeffs 35 which I believe is aus spec.

it's basically a very handy tool to have, and of course being able to run maps with more boost etc is nice too (providing you keep it sensible - small increase only is the sweet spot).

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539575
Share on other sites

Hi All

Has anyone tried the Willall fliuds yet?

Cheers

Mark

Has anyone tried heat wrapping the exhaust from the catback to reduce trans temps?

I have read this in a few other forums and it seems to lower temps in the trans AND the rear seat of the car!!!

Is this true???

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4539860
Share on other sites

Thanks for the kind words on our Willall stuff guys, it sure is a labour of love :thumbsup:

However heat wrapping the exhaust wont reduce transmission temperature. The actual heat isnt something that comes from outside the transmission and radiates in, but rather a function of the energy of the engine being turned into drive at the transmission itself. As Newton was quick to point out there will indeed be conservation of energy, some goes into transferring power, some into noise, and some into heat. Good lubricants and good coolers can drastically reduce the transmission temperature, and the applications of these on R35 I do happen to know something about :)

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4545151
Share on other sites

I took my R35 out to Oran Park today, i was keeping a close eye on the trans oil temps. As has been discussed on threads hereabouts, the temps got to 120*c only after a few laps.

My dealer told me the other day "you'll never get to 120* don't worry" (when discussing the whole warranty thing in relation to track days).

- obviously they didnt push the car on their recent drive days

Anyway, how hot is too hot? and when should we be looking to replace the oil?

If i were to follow the dealer requirement, i would be changing the oil tomorrow costing the best part of $2k, which is ridiculous of course.

Thoughts?

Tx. Cooling is definitely one upgrade that all R35 trackers should seriously consider but you should also think about changing the exhaust setup to let the cooler do it's job.

I just noticed a build on the NAGTROC site where they've fitted the WL GR6 cooling system but the GT-R's awkwardly positioned muffler (on the quad tip system) is literally kissing the WL rear mounted radiator while also completely blocking it's air flow.

The ZELE car had a single sided exhaust setup and the volume of space it clears up for the radiator is simply staggering. And theirs was a twin muffler system but simply making it one sided moved both mufflers right out of the way of the radiator. A single pipe system with only one pack would clear even more room.

Using a single pipe also frees up the exhaust exit point on one side so there may be a possibility of fitting a secondary radiator there, air flow permitting. 

Has Willal run any cooling comparisons with different exhaust arrangements?

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4549836
Share on other sites

  • 1 month later...
As Newton was quick to point out there will indeed be conservation of energy....

Absolutely incorrect. Newton described the three laws from which todays classical mechanics are based. The law of conservation of energy is generally accredited to Noether some 250 years later in the early 20th century.

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4643093
Share on other sites

Absolutely incorrect. Newton described the three laws from which todays classical mechanics are based. The law of conservation of energy is generally accredited to Noether some 250 years later in the early 20th century.

So you registered as a member of the Skyline forum and used your first post to object to who was stated as the founder of the law of conservation of energy.....nice....you are going to be a worthwhile contributor. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4643115
Share on other sites

Its a good post that one. Although Newton didnt actually clarify the law, he did put many of the building blocks in place showing how energy was conserved in his mass-spring system :)

http://ccrma.stanford.edu/~jos/pasp/Energy...n_s_Second.html

However this is a GTR forum, hows everyones 35 transmission temps holding up :bunny:

Link to comment
https://www.sau.com.au/forums/topic/265800-r35-trans-temps/#findComment-4643360
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...