Jump to content
SAU Community

Recommended Posts

Hey guys,

Wrecking a white R32 GTR, minus motor and box, front brakes and some interior bits and pieces. Damaged drivers side door and gaurd

PM, text or ring me on 0438911374

Cheers,

Michael

Sorry guys, also 1 pair of Garrett 2860's and other engine parts.

Am dropping turbos off today to get a written report on their condition.

Also 2 sets wheels

Sorry guys, also 1 pair of Garrett 2860's and other engine parts.

Am dropping turbos off today to get a written report on their condition.

Also 2 sets wheels

Hey man, still interested in turbos, let me know how the report comes back, gimme dibs... lol, still interested in a set of rims, dont let that guard go either, cheers Damo

Where abouts are you located, and would you have the stock exhaust from the cat back? Cheers

Dave

Hey mate,

Located in sheffield, which is 20 minutes inland from devonport.

I think the exhaust is stock but it has had an apexi stainless steel muffler welded onto it, not too sure though.

Will check in morning and get back to you if you wish.

are there still seats? if so what condition are they in? if madaz doesn't take the turbos i will

Hey mate,

Seats are still there but the drivers seat and the framework is all bent up from where he hit the pole, passenger seat is in good nick though

Cheers

Hey man, still interested in turbos, let me know how the report comes back, gimme dibs... lol, still interested in a set of rims, dont let that guard go either, cheers Damo

The guy wasnt too keen on giving a written report without stripping them right down and rebuilding them which would then cost me heaps and i would have to sell them for the same as a brand new set would cost :blink:

But, he gave a verbal to me and said that they are in good condition etc and suggested bringing any potential customers down there with me and the turbos so he can give them the an assesment of the turbos face to face.

Still thinking bout the rims, will let you know in the next couple days, still got the guard too if you still want that held

Cheers

you have the left front inner guard? and the left and right brake ducts?

Still got the inner guard, yours for $20 if its the piece im thinking about???? The plastic piece under the wheel arch

Dont know what you mean about the brake ducts???

They the piece of mesh sorta thing in the front bumper?

the bit of plastic that goes between the wheels and the front bar. and the brake ducts screw to the bottem of it. you can see the rhs inner guard in the pic.

I was on the right track then, i thought i was, just wanted to make sure we were on the same page. No brake ducts on either of my skylines, the grey one or the white one, maybe that year didnt come out with them?????

Amyone know????

mate do you have the front reinforcement bar?

The bumper bar reinforcement part? The piece that sits in behind the plastic bumper which you bolt onto the car?

I thin k we are on the same page but i just like to make sure

Cheers,

The bumper bar reinforcement part? The piece that sits in behind the plastic bumper which you bolt onto the car?

I thin k we are on the same page but i just like to make sure

Cheers,

yes thats EXACTLY what im talkng about

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...