Jump to content
SAU Community

Recommended Posts

Would you sell rear calipers & pads only?

Yeah mate, will sell them. $250 for the pair with the pads and brake lines and whatever bolts etc hold calipers and associated brackets on

Cheers

are there still seats? if so what condition are they in? if madaz doesn't take the turbos i will

Hey mate, madaz doesnt want the turbos anymore, Do you still want them? $1600 and they are all yours, and you are quite welcome to take them to a turbo place to get a second opinion on them if you wish, but i will give you my word, they are in really good condition, dont seem very old and are complete.

Cheers,

Michael

any chance you still have the front bar? and how much would you want for all of the seats? . cheers

Sorry mate, No good with the front bar,

Drivers seat is damaged( Bent frame and rips in the fabric, Inrepairable i reckon)

Have got passenger seat $250, Have still got rear seat, $100 for that.

Regards,

Michael

Hello guys,

Still wrecking the GTR, keen to sell everything, nothing is too small, switches, trims, rubbers, you name it and i will sell it if i still have it, can post it if its small enough or help organising freight if its too big to post, or you can pick up yourself.

Rear brakes: $250 with rotors

Intercooler: $80

Bonnet: Already white, $450

AFMx2: $80 each

STD water pump: Used but still in great nick, why spend $170 on a new one when you can get my old one for $70

Please note: this is just a sample of what i still have, just thought i would post a few prices up for any1 who is interested

Also, i previously stated that i had a pair of 2860's, i was incorrect and i apoligise, they are actually Garrett GT2560R-5, in really good condition, did a search on the net for them and come up with a few comments.

Dual ball bearing, rated at 320HP each, true bolt on replacement/upgrade for RB26's. HPI has got them in the Top 20 Turbos list in the latest HPI magazine

Regards,

Michael

Hello guys,

Still wrecking the GTR, keen to sell everything, nothing is too small, switches, trims, rubbers, you name it and i will sell it if i still have it, can post it if its small enough or help organising freight if its too big to post, or you can pick up yourself.

Rear brakes: $250 with rotors

Intercooler: $80

Bonnet: Already white, $450

AFMx2: $80 each

STD water pump: Used but still in great nick, why spend $170 on a new one when you can get my old one for $70

Please note: this is just a sample of what i still have, just thought i would post a few prices up for any1 who is interested

Also, i previously stated that i had a pair of 2860's, i was incorrect and i apoligise, they are actually Garrett GT2560R-5, in really good condition, did a search on the net for them and come up with a few comments.

Dual ball bearing, rated at 320HP each, true bolt on replacement/upgrade for RB26's. HPI has got them in the Top 20 Turbos list in the latest HPI magazine

Regards,

Michael

post-61423-1241080866_thumb.jpg[

Hey guys, picture of 1 set of wheels for sale, Sparco multi-stud racing wheels, 2x 17x9+38 suit 255 wide tires and 2x 17x8+32 suit 235 wide tires. Holden/toyota and nissan/ford stud pattern. 1 wheel has got some gutter rash, the rest are in good nick. 10 wheel nuts and wheel nut tool included. NO tires

Came off a toyota supra, would probably be right offset for GTS-T as well

Would be good for 2nd set of wheels with R Spec rubber for your track days.

$500ono

Cheers,

Michael

have only got the left one, 150 coins and it is all yours

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

All brackets etc are good as gold, has had a hole cut in the bottom of the light, very neat hole, almost like factory? Dont know why but both of them had a hole in them whereas my other GTR didnt have them.

Maybe HiD globes installed and they trying not to burn the lense out???? Anyone have any ideas? Looks too neat to be done for no reason.

It is a std GTR headlight, im pretty sure they are projector types from factory??? Any ideas on this one too????

post-61423-1241424904_thumb.jpg

post-61423-1241425170_thumb.jpg

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

All brackets etc are good as gold, has had a hole cut in the bottom of the light, very neat hole, almost like factory? Dont know why but both of them had a hole in them whereas my other GTR didnt have them.

Maybe HiD globes installed and they trying not to burn the lense out???? Anyone have any ideas? Looks too neat to be done for no reason.

It is a std GTR headlight, im pretty sure they are projector types from factory??? Any ideas on this one too????

post-61423-1241424904_thumb.jpg

post-61423-1241425170_thumb.jpg

Sorry mate, i thought i put a front photo on too, my bad. yeah it is the bug eye type of lense

Cheers,

Hey mate, did you still want the headlight or not? Have had a couple other people interested thats all. I dont mind holding it for a week if you need to get the money, just please let me know if you dont want it anymore

Thanks,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...