Wrecking 1994 R33 Gts-t - Victoria

[Shano3000]

Got alot of parts for sale which i have accumulated over the years. Everything is in good working order unless stated otherwise. Located in Emerald, Victoria. Photos will be put onto photobucket

http://s160.photobucket.com/albums/t177/Shano3000/ will take photos of parts on request aswell.

Wrecking complete R33 GTS-T.

RB25DET Complete Engine 100,000km. Will include everything minus engine loom. Very good condition with stock turbo. Had its major service 3,000km before crashed. All belts, idler tensioner, water pump etc 3000km old. Was running fine after crash - $2000

Gearbox, good condition - $1300

3,000km old exedy heavy duty clutch - $150

Tailshaft - $150

Diff - $150

3" turbo Back exhaust. Bellmouth dump/front pipe into jasma muffler - $400

FMIC Return flow kit. Includes generic fmic with Blitz return flow piping and all clamps/joiners. No holes need to be cut - $300

Front brakes With rotors and pads. Pads still got plenty left. Good condition - $350

Rear Brakes with rotors and pads. Good condition - $150

2 X Starter motors - $50 each

Air Con pump - $50

2 X Gearbox Mounts - $80 each

Rear Axels - $50 pair

Rear bar painted white. Good condition. Appears to have been re-sprayed - $100

Rear bar Reo - $40

Boot lid with Series 1 spoiler - $50

Tail lights - $50 each

undertray stone guard. Has a few small tears - $40

Car mats. Complete set - $50

Drivers side Head light. Off a 4 Door, chrome surround. A little bit yellow. $50

Lots of other parts available. Just let me know what you want and ill get back to you with pics/price.

RB30DET Parts:

Rb25de non vct head from a R32. Head has been cleaned, new valve stem seals, heavy duty springs for turbo application and surface machined flat.

Inlet manifold, injectors and fuel rail, throttle body and all bolts/miscelanious pipes etc - $650

Good Condition S2 RB30 Bottom End, fully assembled. Brought as working motor and stripped head etc off - $75

Rb30 S2 block, disassembled. Includes crank, rods, cradle and block - 6 pack of Bundy

New ACL Duralite cast RB30e pistons and rings, 1mm oversize. Suitable for RB30DET conversion. Will give compression of around 8.3-1. $250

New ACL Duraglide engine bearings. to suit RB30. .25mm oversize. includes rod bearings. $50

RB30 complete engine gasket kit with Headgasket. No sump gasket included - $100

RB26 Oil Pump. Came off R32 GTR. $100

RB20DET Exhaust Manifold. Will bolt to Rb25de head. $40

Will post smaller items at buyers expense. Pickup only for gearbox, engine etc unless you organise everything and pick-up from my house. Contact through here, PM, or message/call me on 0422816780. Cheers, Shane.

[NARTRI]

pm sent

[Shano3000]

Boot lid - Rear garnish - Tail lights SOLD pending payment.

Will reply to PM's tonight.

[Sonuku]

this might sound odd, but i'll pay you $10 for the little plastic screws that hold the boot carpet on

pm me if you can be arsed to post to canberra.. should be about $2 postage

[Shano3000]

Sorry mate, the boot carpet has been removed from car.

Also have:

R33 GTST Ball Bearing Steel Wheel Highflow - very good conditiong - $900

R33 GTST Stock Series 1 Turbo - Good condition - Has 1 snapped exhaust housing stud - $350

[Player_Hater]

undertray stone guard. Has a few small tears - $40 <--- that the stone guard for underneath the engine.. would you happen to know if it will fit a 32gtr?

also do u have the rear seat belt covers available... the little cover surrounding the seat belts on the rear panel where the seat belts come out from

[~Hypnotik~]

Do you have a drivers seat? What condition is it and where are you locateD?

[W0rp3D]

do you have the front bumper?

[Shano3000]

Player Hater - No idea mate, im guessing no though.

Hypnotik - Got the seat although in average condition. No rips, just wear patches - $20

Worped - Was broken from crash.

[mattymatt]

pm sent

[The Mafia]

Can I offer $400 for

Rb25de non vct head from a R32. Head has been cleaned, new valve stem seals, heavy duty springs for turbo application and surface machined flat.

Inlet manifold, injectors and fuel rail, throttle body and all bolts/miscelanious pipes etc - $650

I do not want the inlet manifold, Injectors, throttle body, and bolts \ pipes.

Just the head.

If the fuel rail is the same as the R33 Turbo rail I'll take that though.

Let me know.

[89CAL]

after the dash pad (upper part of dash) if it is available and able to be sent. Let me know a price includng estimated delivery and ill see if i can afford it at the moment lol

Pics as well please

Thanks

[W0rp3D]

Any idea how and what condition the shocks are in?

[~Hypnotik~]

Shano3000: Can you send me pics of the seat please?

[Benzino33]

hey man, any pics of the fmic kit?

[Shano3000]

Worped - 1 Front shock is bent other is good, KYB. Rear shocks are in OK condition, with lowered springs.

Hypnotik - Will take pics now and put em on my photobucket.

Benzino33 - Pics of FMIC are in my photobucket link.

[Benzino33]

PM sent

[Shano3000]

Cat back exhaust - Sold

FMIC kit - Sold

[Benzino33]

do you have the front reo bar?

[Detour]

Pm sent