Jump to content
SAU Community

Recommended Posts

i have a full td06 20g turbo kit for sale

comes with manifold turbo wastegate

all heat wrapped

i can also throw in a twin 2.5 inch zorst $700 completely legal and plumb back with twin cats!

this is all bolt on for a rb2530 in a r31 however will fit a rb20 or a rb25 in a r31 with very minor modifications

8.jpg

15.jpg

16.jpg

4enginebay.jpg

turbo is good for 250rwkw at 12psi

full bost on a rb2530 at 2k

in can and drivable if you need a test to swwe what it sounds like and goes like

Link to comment
https://www.sau.com.au/forums/topic/266493-td06-20g-turbo-kit/
Share on other sites

Is this Mark's old setup?

If so it is identical to my turbo setup as the turbo was originally meant for a drag GTR twin TD06-20G setup that was split up, i got one of the turbos, Mark the other. So will work real well on an RB20, 260rwkws at 18psi and makes that boost at about 4,200rpm but really sits you in your seat from 4,500rpm.

2k is a steal!

so does it come with oil lines and dump pipe? sorry for the sill question but only turbo manifold and gate were listed.

what brand is the gate?

haw long have you had it running on your car? kms?

thanks damo

yea marks old setup

it comes with the oil lines

has been on the car for about 2000 km and on marks car( same engine... i bought the whole engine) for another 1k

gate is the stock trust one

for an extra 700 comes with a custom twin 2.5 inch exhuast with twin cats and muffle ( fits a r31 obvioulsy)

or 200 exta a nd ill cop of the dump to under car and a decent length from the wastegate to get you cracking on your car

pete

0448468884

This is just what i was looking for until a couple of weeks ago until the engine let go in my daily :banana:

I'll see if you're still selling it in a few weeks time when i can get the cash together.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...