Jump to content
SAU Community

Just Jap Stealth Intercooler Problems... R34 Gtt

Daz305

By Daz305,
in Engines & Forced Induction

 Share

Recommended Posts

Daz305 Rising Star

Daz305

Posted
Posted

hi guys i recently got a just jap stealth intercooler for my r34 gtt with the nismo aero body kit, i got the intercooler on ok but am having a real hard time getn the front bit of the chassis back on infront of it.... it seems no matter wat i try it is about a cm or 2 from fitting back neatly wether i try mounting the intercooler higher like on the same bolt as the release lever for the bonnet or lower with a bracket and to the side like jase-r34 did... (http://www.skylinesaustralia.com/forums/Jj...lth+intercooler)

in the picture wat the red arrow is pointing to the front of the fan stops me fron having the fmic back any further and the yellow line is the part of teh chassis that i cant get back on only just because the intercooler doesnt seem to fit in that gap... so i cant get the holes lined up to put all the bolts back in...

any1 got suggestions or have this happen to them?

thanx

post-54869-1240323651_thumb.jpg

_Ryan_ Grand Master

_Ryan_

Posted
Posted
i was hoping i woudlnt have to cut it but i guess it aint that bad... its a bit anoyn but i thought they were ment to b bolt on kit basically lol

yeah, i had to cut a little, i rang and asked if i had to cut anything when purchasing, and they said no :)

only way to not cut would to be to remove the thermo or put a rather thin one on

scotty014 Veteran

scotty014

Posted
Posted

i got the same intercooler and got the guys at eas performance to fit it for me and the only cutting that was done was the plastic bits on the front of the standard r34 front bar and that was it. i can see mine sits up against the reo bar but no cutting or trimming on it at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      After market rear camber arm adjustment

      By sonicii · Posted

      How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...