Jump to content
SAU Community

R32 Gtr Diff Gears

luke gtr
 Share

Recommended Posts

luke gtr Grand Master

luke gtr

Posted
Posted

hi everyone, im looking for some info on taller ratio gtr diff gearing.

ive heard r34 gtr can be used, is there anything else out there?

im sure i read a while ago the sss r32 gtr was using aftermarket gears.

any help would be greatly appreciated, thanks, luke.

Link to comment
https://www.sau.com.au/forums/topic/267048-r32-gtr-diff-gears/
Share on other sites
luke gtr Grand Master

luke gtr

Posted
  • Author
Posted
It depends how tall you are wanting to go and why??

The R34 GTR has a 3.55:1.

I have a set of 3.9**:1's here but I dont know what they are out of.

im probably looking at around the mid 3's, so r34 gears would be good. i want taller gears to drop the rpm of freeway travel, and try and get better economy :laugh:

not overly bothered by the fact itll have slower pick up, hopefully some mods will fix that :thumbsup:

so, anyone have r34 gtr front and rear gears for sale???

Beer Baron Grand Master

Beer Baron

Posted
Posted

honestly if you want better economy by a different car. GTRs are performance cars. they will always be hungry and should be. putting 3.5s in there will just dull the performance and give you an astronomical theoretical top speed of 350+ that you will never get too. most people go the other way and do 4.4:1 for even better acceleration and sacrifice top speed down to about 260-270 or so which is plenty. :P

bnr#@ Mentor

bnr#@

Posted
Posted (edited)
dont know, but 4.11's are 3100 at 110km, so im guessing around 3300-3500ish????

eng rpm x gear ratio x diff ratio x rolling diameter isnt it?

I realy doubt that... a stock geared GTR is 2600rpm for 100km, doubt it takes another 500rpm to get the extra 10ks... not brave enough to try now though as had a few... lol

Me thinks yours isnt exactly stock in that department...

Edited by bnr#@
Beer Baron Grand Master

Beer Baron

Posted
Posted
What revs would 4.4:1 give you at 100Ks in a 32 GTR? Interested in doing the swap for those tighter tracks...

can't remember exactly, but it does buzz along a bit. lol. I am about to finish the new set-up which is OSG close ratio box, with the 4.4:1 diff gears, built N1 Nur motor, and tiny HKS GT-SS turbos. it should be pretty radical on corner exit now! and will have less top speed, but now have a chance of actually getting there.

luke gtr Grand Master

luke gtr

Posted
  • Author
Posted
I realy doubt that... a stock geared GTR is 2600rpm for 100km, doubt it takes another 500rpm to get the extra 10ks... not brave enough to try now though as had a few... lol

Me thinks yours isnt exactly stock in that department...

i doubt mine is modified(apart from 235/45r17's), sits at around 3000@100km, then around 3200@110km

ill have to see if i can get someone to record it with my phone.

SLAPS Rising Star

SLAPS

Posted
Posted (edited)

I agree with Beer Baron.

I've tried multiple diff ratio's in the RWD with up over 300rwkw and even 3.9's kill the feel of the car. It transforms the car from a fast reving FUN sports car in to a dull and LAGGY car.

The longer ratio's make the car feel so so much laggier its not funny. Mods won't make up for the lack of FUN factor but it will push the speeds where the car may feel like its starting to really move to higher road speed. Not so good for those demerit points.

What really sucked about the longer ratio IMO was corner exit. It felt as if the car went from having a gear for every corner to having gears that were either too high or too low, that is unless I was willing to do stupid speeds on the street which is just silly.

The R34 GTR 6speed. Does that drop the highway RPM at 100km/h in top gear? Maybe a gearbox + diff swap is the answer?

Or... Another car.. The tuned LS1 auto purs along at a little over 1500rpm at 100km/h with 7.5-8.5l/100 on the calibrated trip computer. :P

Edited by TheRogue
  • 1 month later...
luke gtr Grand Master

luke gtr

Posted
  • Author
Posted
can anyone answer me if the R32 gtr diff is a 1.5 way or 1 way

and will it bolt straight into a r32 gtst??

pretty sure gtr/gtst diff internals are different. outside may be the same though...

standard diffs are generally classed as 1 way.

hope this helps.

some_cs_student Veteran

some_cs_student

Posted
Posted
i doubt mine is modified(apart from 235/45r17's), sits at around 3000@100km, then around 3200@110km

ill have to see if i can get someone to record it with my phone.

I remember getting around 3K (looked like 2950RPM or similar) in 5th gear @ 110km/h on 235/45/17, R33 :)

Speedo is slightly off by maybe 4km/h at this speed...

heller44 Mentor

heller44

Posted
Posted (edited)

From here. (have to give credit)

http://www.skylinesaustralia.com/forums/Ge...or-t244080.html

Use this.

http://racingdownloads.com/racing_software-22.html

And this.

http://www.jbskyline.net/R32/GTR/Specs/

From memory I thought I was knocking on 3100 @ 110. This is with a 26 and gtr box, with 4.375:1 gears (standard gts4 crown and pinion). Doesn't sound or feel nasty, just like driving a smaller 4 cyl car.

Can't take my car for a drive as it has almost all the front end out atm, new brakes and front driveshafts getting reconditioned.

Edited by heller44
  • 4 months later...
manage13 Proficient

manage13

Posted
Posted
can't remember exactly, but it does buzz along a bit. lol. I am about to finish the new set-up which is OSG close ratio box, with the 4.4:1 diff gears, built N1 Nur motor, and tiny HKS GT-SS turbos. it should be pretty radical on corner exit now! and will have less top speed, but now have a chance of actually getting there.

Such a noobie question but where can I get 4.4:1 diff gears from?? As in purchase.

BeEnAr Experienced

BeEnAr

Posted
Posted
I remember getting around 3K (looked like 2950RPM or similar) in 5th gear @ 110km/h on 235/45/17, R33 ;)

Speedo is slightly off by maybe 4km/h at this speed...

I get 3K @ 110km/h on the sat nav, 2900 @ 100km/h on 235/45/17 R32 GTR VSpec II.

Not sure if I have stock internals in GB or Diff though

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...