Jump to content
SAU Community

Recommended Posts

and as some of u may have guessed it was pretty much a one sided battle :P

GO GIRL!

Josies best ET was 14.22 @ 101.10mph 60ft = 2.366

My best ET was 14.569 @ 97.63mph 60ft = 2.313

however

Soarers best ET was 13.879 @ 101.10mph (Driver inark)

NOTANRs best ET was 14.089 @ 93.16mph (Driver Dr_Drift)

As you can see i was getting a high mph but low ET... mainly cause i couldn't launch the damn thing with that racing clutch which was a shame...

We lined up twice and here are the results:

Josie 60ft = 3.121 ET = 15.296 @ 100.12mph

Me 60ft = 2.322 ET = 14.591 @ 97.76mph

Josie 60ft = 2.729 ET = 14.78 @ 100.81mph

Me 60ft = 2.782 ET = 15.038 @ 96.85mph

Highest MPH:

Josie = 102.2mph

Me = 98.41mph

Soarer = 102.22mph

NOTANR = 98.41

i still think the soarer could go faster, Josie was racing with TRC on, transmission in normal mode and OD which didnt help. The second time i drove with everything set how it should i lost traction all the way up the 60ft mark and had to back right off (stalled it too high off the line).... i reckon if we kept going we could have got it into the mid 13s.

I ended up giving control of my car to the good doctor as i was struggling to get it off the line not getting traction til after 3rd gear and all those times were done on low boost (10psi)... when i upped the boost to try and get into the 13s something broke... and it blew a lovely big cloud of black smoke as sam was driving it at about the 3/4 mark. More woes for my car.

Congratulations to my gf who didnt even want to go and was brought to tears at the thought of having to do it... once she got there and got on the track she was like a demon!! nice one and good on u for giving it a go... just wish i could have seen the reactions from ppl when they read ur name out and realised it was a girl driving it :D

Link to comment
https://www.sau.com.au/forums/topic/26712-well-the-times-are-in/
Share on other sites

hey i beat her in one race!! and the ET from that was faster than the one when she beat me... wasnt a total owning like u all thought it would be... :P on low boost.

and i dont know what broke on my car... going to have to take it to BMT and find out i guess... seems to happen when on full boost it just missfires and chugs... any other time its fine.

yeah thats the prob... after about 12runs we finally upped the boost and something went bad lol was running a bit hot i think cause when i went to put the boost up the heat from the turbo burnt my arm... and my arm was about 3 or 4 inches away from the turbo lol

even josie did 9 and i did 2 in her car... and we also just sat down the back with the bonnet up for up to 15mins a time talking... could have got more runs in if we liked and we left early

after about 12runs we finally upped the boost and something went bad lol was running a bit hot i think cause when i went to put the boost up the heat from the turbo burnt my arm
i thought you meant you upped it from inside the cabin and could feel heat from there. I was thinking that was one hot turbo but ahhh umm nevermind :P

lol ak... no just a simple bleed valve which took me 10 goes to change... helps if u turn it in the right direction... everytime i changed it i turned the damn thing down... funny thing was i ran a faster time with it less than 10psi lol

couple of funny pics....

i originally wasnt allowed to race as i didnt have the thing that holds the battery down on and it wasnt in the car so i had to bodge it up :P

bodgy.jpg

west also came along in his R33 GTST and ran a 13.6 from memory... he got a bit of a sore hand changing gears... wonder why??

bodgy2.jpg

so well BEATEN BY A GIRL.. how does it feel?

and i dunno whether she reads in here - but GREAT WORK JOSIE!! Thats pretty good times for a fairly stock soarer. You did great.

:)

Sounds like it was a quiet night at Calder.. good you got heaps of runs in. The 2 times i've been i've been lucky to get like 3 runs.

still no news on my car :cry: "end of this week definitely"... bullshit..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...