Jump to content
SAU Community

R32 GTR Nismo N1 Turbo's $2300 (1.5 years old)

amosite
 Share

Recommended Posts

amosite Proficient

amosite

Posted
Posted

These are off my brothers car which topped out 337wheel kw (about 450Hp) on 1.4 bar (20.5 psi) after we installed the injectors. Please note this this is on pump fuel and with the finial power run and MAP I chose to drop ignition timing to compensate for the inconsistent fuel we have in sydney

No 1/4 mile figures have been done at the creek, however with the Data pulled out of the MoTeC ECU 11.2 and 11.1 were the figures at 195 kph (about 121 mph).

These have been on the car for a year and a half up until a couple of weeks ago these were only run on a measly 1 bar boost due to lack of fuel however we have since fitted 1000 cc injectors, pump etc etc to run up to 20 psi. They ahve done about 21,000 Road Klms

These bad boys are on 20Psi by 4,000 RPM and provide punch all the way to 8500 RPM where power does start to drop off slightly with the current set up.

Best used with aftermarket IC, ECU, Exhaust, cam gears, further intake and exhaust ect etc. If you have the mods you can push an extra 4 psi and achieve more grunt however I chose not to do this.

These are genuine NISMO turbo's not made up local units with full steel shaft that is larger then standard, larger compressor wheels and duel roller bearings.

Selling due to upgrade that should put us in the mid ten ohh bracket

Please do not reply with stupid offers as these cost over $4800 new and are an absolute steal at $2300

If you would like pic's please email me

BNR32 Rising Star

BNR32

Posted
Posted

If amosite is genuine, which i am sure he is, these puppy's are an absolute bargain!

I was lucky enough to purchase a car with BNR34 N1 turbos already fitted in Japan along with a host of other gear. I can vouch for amosite in that these turbos (even though slightly different to my own) are ultra responsive and make a huge heap of mid range torque and response.

I am so happy with my turbos that i dont think i will ever look to upgrade as i cant see any other turbo out performing these type for pure street use...They are driveable, useable and provide a nice wide meaty power range...

Good luck with the sale and for anyone interested, these turbos are the crem del a crem for any serious street car. And if you dont belive me, just look at the latest HPI 7, the top low mount turbo GTR from Phoenix power garage used BNR34 N1 turbos to the tune of 630 odd PS at the wheels!!!

Basically, buy these turbos and you are guaranteed atleast 400RWHP (providing you have pump inject. etc), for a tad over $2000 its gotta be worth it!

  • 2 months later...
DoughBoy Veteran

DoughBoy

Posted
Posted

Hi,

I noticed you are after a set of N1 turbos to suit an RB26. I've got a couple here in good condition (zero shaft play) for sale - asking $2000. Let me know if you are interested.

Regards,

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...