Jump to content
SAU Community

Recommended Posts

hey haha i ran a 13.3 at 112mph need to improve big time.

me and a few mates are heading down tonight.

taking a 33 with 250rwhp to see what it can do before we change all the turbo this weekend and taking a mates 33 with 360rwhp using a gt-rs before we change the cams in it. Just wanna see what they do before and after kinda thing.

13@130mph ?? I did a 13@107mph

unless you meant 11 sex

No, I meant 13..

Maybe it's cos he is gonna start in 2nd and just do a bit burnout-takeoff :D

Close.. I'll start in 1st but it will probably be top of 4th before it stops spinning :blush:

drags are $40 for competitor, i think 10 or 15 for spectator, its at quit motorplex quinana, google it :) every wednesday, dont need to be a member, just need a helmet, long cloths and enclosed shoes, oh and a license and roadworthy car haha

VishR33, Woop Ass Wednesdays is a weekly event held at the Perth Motorplex in Kwinana

You can find the details here http://www.motorplex.com.au/

Season ends soon!!

I'm going to head done before the season ends for a few runs, was too tired to go tonight.

I'm taking my car down next week to see how of goes. The previous owner ran a 14.1 with wheel spin, so I'm looking for a 13.9 with the semi slicks. I've got the car for it, just lacking the driving skills :O got a few mates coming down as well. They always need more Sylines there!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...