Jump to content
SAU Community

Recommended Posts

Hey all,

quick question.

The middle muffler / resonator part in the middle of the stock system, is it just a noise reducer or drone reducer or what?

Will removing it make the exhaust louder? I do have a after market muffler but it could be that tiny bit louder. Its deep but needs an extra kick.

Or will it stuff with epa if i take it out etc etc

Thanks all.

Edited by V35 Matt

i wanted to get the same thing done, and had the same view about the noise....it does make a difference from the couple of 350z vids ive seen on youtube.

Yes it is only a resonator...and btw whats epa?

Hey all,

quick question.

The middle muffler / resonator part in the middle of the stock system, is it just a noise reducer or drone reducer or what?

Will removing it make the exhaust louder? I do have a after market muffler but it could be that tiny bit louder. Its deep but needs an extra kick.

Or will it stuff with epa if i take it out etc etc

Thanks all.

Just a resonator.

Cat converters affect EPA.

So how much will it increase flow without it? and how much louder will it get?

I dont want stupid loud, just enough rumble.

I doubt there would be any kind of meaningful flow increase.

Put it this way, my Fujitsubo Legalis 3" exhaust has a resonator on it in a similar style, and that thing flooooooowwwwwwssssss.

It has more to do the size and design of the pipe than having a resonator.

Would be a bit louder than stock. Don't think it would be enough to fail a noise test though.

Why not just have a larger rear muffler installed?

Or even just a larger tail pipe.

Edited by iamhe77

I asked Midas about it, and they said that the main muffler down the back is so large that removing the mid muffler wont be a huge difference, or maybe not a difference at all....but im thinking, nissan did put it there cuz maybe the stock rear muffler wasn't cutting it. Not that im saying it was a last minute bolt on, just my theory on it.

the resonators on my car are gone

car sounds a bit raspier at higher revs

normal driving no difference

so BLISTIC your running the stock system without the resonator?

I had a look on this thread and they were talking about the exhaust components on a 350z...and said "The OEM Mid pipe consists of 60mm mild steel piping with several mild bends and curves. There is a short resonator muffler near the Y Pipe end which some 350Z owners have chosen to remove claiming performance gains and a more aggressive exhaust note"

http://www.350z-tech.com/zwiki/Exhaust_system_overview

I had a look on this thread and they were talking about the exhaust components on a 350z...and said "The OEM Mid pipe consists of 60mm mild steel piping with several mild bends and curves. There is a short resonator muffler near the Y Pipe end which some 350Z owners have chosen to remove claiming performance gains and a more aggressive exhaust note"

http://www.350z-tech.com/zwiki/Exhaust_system_overview

that is basically what i have done

i dont know about performance gains cos i dynoed it at 177.1rwkw seems about right

just the exhaust note when you floor it, sounds a bit better.

You will find that the resonators that fujitsubo use are simply "straight thru" cans. e.g, theres nothing really in them.

That's right.. well mostly.

As you can see, one of the "cans" is blanked which I presume aids in reducing the noise considerably.

FujitsuboLegalisR.jpg

Why would you want something in them?

Turbo + high flowing Exhaust = :wub:

I was offered a "high flowing" custom exhaust for my car, but to keep the sound down, he would pack the muffler with steel wool.

I would imagine this would eliminate the "high flowing" capabilities of the unit!

cutting out the resonator n putting a straight pip thru is like 40-60 bux at an exhaust shop. you shouldnt go wrong. ive done it to my s2000 and it get throatier sound, thats it. cant really go wrong for $50. you can always weld the resonator back in if you wanted to.

the difference would be audible only, power wont change from this...

the illusion of power being that of a slightly higher exhaust note is all **UNLESS** you had an aftermarket exhaust on and the resinator was actually restricting things...

sounds stupid, but does happen on a lot of imports, last car I bought and brought over, pulled the resinator out, and it was a 3" pipe / resinator

but on further inspection the 3" resinator was hollow and had a 2" resinator welded into it... hard to explain and i've lost the pics... in that instance

removing it = more power

:D

I might be interested in trying this though, for $50 etc, you know when you stick it to these cars they get a little throaty, for purely wank factor

little bit more of a throaty sound never hurt anyone :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...