Jump to content
SAU Community

Recommended Posts

I know there are a number of us M35 out there running stock exhaust system, so I though I would make up this "little" list.

This is not a complete list, but one I made up from the info I have put together.

I am sure you guys have seen that most exhaust are JASMA compliant.

For those who don't know, the sound level that all JASMA compliant exhausts must get under is 95dB - which makes it largely irrelevant over here.

Exhausts

Nissan OE system

Type: Full

Pipe Diameter: approx 50mm (2”)

Volume: 82dB

Muffler outlet: 2x approx 40mm

Material: Mild Steel

HKS “De-Moda”

HKSDemoda.jpgHKSDemodaoncar.jpg

Type: Cat-back

Pipe Diameter: 65mm (2.5”)

Volume: 83dB (88dB with straight through front pipe)

Muffler outlet: 2x 120mm

Material: Stainless Steel SUS304

RRP: 78,750yen

Website: HKS

Blitz “NUR-Touring”

BlitzNUR-Touring.jpg

Type: Cat-back

Pipe Diameter:80mm

Volume: 82dB

Muffler outlet: 1x 114mm Oval

Material: Stainless Steel SUS304

RRP: 67,067yen

Website: Blitz

Fujitsubo “Legalis R”

FujitsuboLegalisR.jpgFujitsunoLegalisR2.jpg

Type: Cat-back

Pipe Diameter: 76mm

Volume: 86dB

Muffler Outlet: 2x 96mm

Material: Stainless Steel SUS304

RRP: 108,150yen

Website: Fujitsubo

Fujitsubo “Wagonlis”

FujiWagonlisR.jpgFujiWagonlis2.jpg

Type: Cat-back

Pipe Diameter: 70mm

Volume: 81dB

Muffler Outlet: 1x 170x45mm

Material: Stainless Steel SUS304

RRP: 69,300

Website: Fujitsubo

Kakimoto “N1 FullMega +Rev”

kakimotoN1FullHyperMega.png

Type: Cat-back

Pipe Diameter: 80mm

Volume: 93dB

Muffler Outlet: 1x 152mm

Material: Stainless Steel SUS304

RRP: 87,150yen

Website: Kakimoto (Malware Alert!)

Kakimoto “R”

KakimotoR.jpg

Type: Cat-back

Pipe Diameter: 80mm

Volume: 86dB

Muffler Outlet: 1x 115mm

Material: Stainless Steel SUS304

RRP: 86,100

Website: Kakimoto (Malware Alert!)

Tanabe “Medallion Touring”

Medallion.jpg

Type: Cat-back

Pipe Diameter: 60mm

Volume: 83dB

Muffler Outlet: 1x 100mm

Material: Stainless Steel SUS304

RRP: 92,400yen

Website: Tanabe

Trust “Power Extreme 2”

TrustPower2.jpg

Type: Cat-back

Pipe Diameter: 76mm

Volume: 92dB

Muffler Outlet: 1x 145mm

Material: Stainless Steel SUS304

RRP: 95,600yen

Website: Trust

Freeway/Dolphin “Spec-TFW”

Dolphinexhaust.jpg

Type: Cat-back

Pipe Diameter: 80mm

Volume: 93dB

Muffler Outlet: 2x 102mm

Material: Stainless Steel SUS304

RRP: 102,900yen

Website: Dolphin

Nismo “S-Tune”

NismoWeldina.jpg

Type: Cat-back or just the Weldium Muffler

Pipe Diameter: 76mm

Volume: 85dB

Muffler Outlet: 2x 65x65mm

Material: Stainless Steel SUS304

RRP: 105,200yen

Website: Nismo

Zees “Zelius Dioss”

ZeesZeliusDioss.jpg

Type: Cat-back or can include front pipe (PM35 only)

Pipe Diameter: 60mm

Volume: 84dB

Muffler Outlet: 4x 93x83mm (2x 93x83mm for NM35)

Material: Stainless Steel SUS304

RRP: 181,800 yen (97,800yen for NM35)

Website: ZEES

Takero’s “Full Titan”

TakerosFullTitan.jpg

Type: Cat-back

Pipe Diameter: 100mm

Volume: F**k’n LOUD. Yes, it is

clip

Muffler Outlet: 1x 156mm or 2x 125mm

Material: Titanium

RRP: 176,400

Website: Takero's

Mufflers

Raizer Type-R, Type-E, Type-O, Type-B, Type-D

RaizerType-R.jpgRaizerType-E.jpgRaizerType-O.jpgRaizerType-B.jpgRaizerType-D.jpg

Type: muffler only

Pipe Diameter: 60mm (Painted black – heat resistant)

Volume: All under 88dB

Muffler Outlet: ® 1x 115mm, (E) 2x 85x80mm (O) 2x 93x80mm (B) 1x 205x105mm (D) 2x 100mm

Material: Stainless Steel SUS304

RRP: ® 32,800yen (E) 44,800 (O) 48,800 (B) 41,800 (D) 39,800

Website: Forget it!

Moore “Ti” and various others

Moore.jpg

Type: Muffler

Pipe Diameter: 60mm

Volume: 86-88dB

Muffler Outlet: 1x 115mm

Material: Stainless Steel SUS304 with Titanium muffler tip

RRP: 45,800yen

Website: Can buy from here

Front Pipes

Dolphin

Dolphinfrontpipe.jpg

Type: De-cat front pipe (they also have a dump pipe)

Pipe Diameter: 80mm

Volume: unknown increase

Material: Stainless Steel SUS304

RRP: 33,600yen

Website: Dolphin

Kakimoto

Type: De-cat front pipe

Pipe Diameter: 80mm

Volume: +2dB to any other aftermarket exhaust

Material: Stainless Steel SUS304

RRP: 29,400yen

Website: Kakimoto (Malware alert!)

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/267956-m35-aftermarket-exhaust/
Share on other sites

  • Replies 186
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Look at all the shiny shit bro!!!!......this will look sooooo sick when I roll bro!!!. :P

Sorry could not resist.

Great job again Cam......again you are trying to send me broke......I like the twin setup.... :happy:

Also do you want us to post locals hear to?

Edited by Jetwreck
Great job again Cam......again you are trying to send me broke......I like the twin setup.... :blink:

Also do you want us to post locals hear to?

Not trying to send you broke... yet. (Wait until I do intercoolers & bodykits!)

Yes, the Zeluis Dioss is very nice... on PM35.

Yeah man, post locals. Would be good to see some good options over here.

Edited by iamhe77
Takero’s “Full Titan”

TakerosFullTitan.jpg

Type: Cat-back

Pipe Diameter: 100mm

Volume: F**k’n LOUD. Yes, it is

clip

Muffler Outlet: 1x 156mm or 2x 125mm

Material: Titanium

RRP: 176,400

Website: Takero's

im SO getting this exhaust!! sounds f*kin hot!!

i bought a kakimoto muffler

thinking of getting some piping made and welding it on :D

ive got a kakimoto "R" cat back system on mine. sounds nice. ill do a vid if i can get motivated one day.

Pics and sound of rear of your cars please?

Might be interested in a swap(ish)

I took a vid of my exhaust combo (Kakimoto front pipe & Fujitsubo Legais R exhaust).

Will post it soon in this thread.

Just wondering, if my dump is 80mm and my exhaust is 76mm, would it make any difference to match the diameter?

I know it would be better if the whole thing was 80mm, but would it make that much difference since exhaust gases contract as they get cooler?

I'll do a vid tomorrow. Only thing is: how do we compare volumes (that sounds rude :P).

I've watched a couple of vid's on the utube and I'm thinking the camera has auto lowered the volume on a couple. I'll just shoot it straight and see what I get.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
×
×
  • Create New...