Jump to content
SAU Community

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

haha was looking at this thread this morning, cause i just got my defi boost gauge in the mail. :)

but yeah mines going on dash next to A-pillar, should be wired up tomorrow :D

Oooo! post a pic when its done! :D u running a controller aswell ?

nup no need for controller . .

Defi Racer .

i would upload a pic now, but for some stupid reason its only giving me a 2mb upload size. its normally 8mb !

Either use Infranview to change the files size (it is free) or upload it to photobucket of something similar :P

hey hey 8mp limit is back !

here it is mounted, bracket is under the dash matt, with to slight slits to let the mounting point to the cup through. double sided tape underneath

regular workshop is full so its not wired up yet

should be wired up tomorrow, if not, i'll have a empty cup on my dash for a week lol

post-16976-1244710141_thumb.jpg

post-16976-1244710243_thumb.jpg

hey hey 8mp limit is back !

here it is mounted, bracket is under the dash matt, with to slight slits to let the mounting point to the cup through. double sided tape underneath

regular workshop is full so its not wired up yet

should be wired up tomorrow, if not, i'll have a empty cup on my dash for a week lol

Looks good TJ. :)

Especially with the mat hiding the bracket.

  • 1 month later...
when you guys put the gauge in car, where do u guys get the power from? if the light of guage will be on when you turn on the head light

take the light power off your cigarette lighter. It has to be useful for something. LOL

currently got oil temp, oil pressure and water temp in Saber S2 for the girl's car. oil temp + pressure in the glove box, water and boost to go into the ash tray spot (all 60mm).

the series 2's scream at you when you go past a defined limit, hence why 2 of them are mostly out of sight.

will post pics when they're all in. still trying to get a suitable boost gauge.

when you guys put the gauge in car, where do u guys get the power from? if the light of guage will be on when you turn on the head light

BTW, did anyone try to put the GTR 3 guages cluster on their car, hard work? my one is series 1, so it got no guage in it at all and i like the GTR set

I've got my setup like Nick's (Goldzilla) but just flipped around (I've got my 3x Autogauge gauges on the bottom and my head unit on top)...I'm thinking of changing it to like Nick's setup...

Also although off topic....you guys got any ideas where to mount the the hand controller from the Blitz Spec-R boost controller. I've currently got it on my vent (used a clip from an old ambi-pur car air freshener) for whent he cops pull up, you can easly take it off and put it away but I would like to use my vent...any ideas

I'll take a photo of how its currently setup

I've got my setup like Nick's (Goldzilla) but just flipped around (I've got my 3x Autogauge gauges on the bottom and my head unit on top)...I'm thinking of changing it to like Nick's setup...

I'll probably be swapping my air-con and stereo when I eventually (if ever) get around to changing my head unit - I'd like to install a single-DIN DVD unit, but seeing as I need room for the screen to swing out I might put it in the top slot and the air-con controls on the bottom (if it can be done). The gauges will most likely stay in the middle slot.

As for my boost controller, I've removed my ash-tray (I've never smoked, and don't allow others to smoke in my car) and used that spot to hold my Defi gauge controller and the GReddy EBC. This shot only shows the Defi controller installed, but I had to cut the back out of the ash-tray holder to get the gauge controller to fit (and run the wires, of course), and the EBC now sits on top of that. Oh, and I can still use the cup holders comfortably!

DefisintheStagea1.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...