Jump to content
SAU Community

Recommended Posts

thought i'd chuck up some info on my car...

its a 1989 Passage GT

Forged RB25DET

Polished and ported head

RB25 gearbox with short shift

Tomei technical trax 2way diff

600x300x76 FMIC and piping

KKR480 Turbo

Koni adjustable sports suspension

R33 4 pot front calipers with slotted rotors

R33 2 pot rear calipers with slotted rotors

Power FC + hand controller

PWR 42mm alloy radiator

bucket seats

Sparco hyper fang II 17x9 +15 all round

3" turbo back exhaust

Z32 AFM

750cc powerflow injectors

RB26 coil packs

700hp fuel pump

Gates timing belt

clear indicators

auto spoiler

ADThree R30 rear lip

boost, oil pressure, oil temp, coolant temp gauges

few other bits and pieces...

NewDyno.jpg

DSC02986.jpg

DSC02989.jpg

Picture120.jpg

Picture113.jpg

spending a bit of time tidying things up now.. main focus is the engine bay at the moment..

looked like this when i bought it..

DSC01696.jpg

after a bit of cleaning/removing/hiding, its now like this... need to get a greddy plenum to get it how i want it thought.. thats the next purchase

100_2840.jpg

Link to comment
https://www.sau.com.au/forums/topic/268006-rb25-powered-hr31-passage-gt/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

"what wrong with 235/45R17's on a 17x9?"

I guess nothing but for the fact that 235/45 are designed to go on 8's but you choose to stretch them over 9's exposing the tire walls & wheels to anything that comes along!

And the correct size for your 9's is 255/40

As you say ................. what wrong?

For me .......................... everything is wrong!!!

i think you'll find a 235/45R17 is completely legal on widths from 7.5" up to 9", with 8" being the apparent optimum width.

not to mention a 235 is the largest tyre i can fit on those rims without having issues with rubbing etc, also from a price point of view they are the best bang for your buck.

so in your opinion it's too small, and you don't like my wing.. that's fine, i setup my cars how I like them, and if other people approve, then that's just a bonus.

ps, can you please point out which part of the rim is exposed in the below picture?

100_2866.jpg

Let's see ........................ everything outside of the wheel protection bead, that really, is now doing SFA because the tire has been stretched to it's legal MAX!

Tell me this, WHY would you want to put a tire designed for 8" wheels onto anything more than 1/2" bigger when it stretches the sidewalls as you have?

im thinking that mitchy has gone with a Jap streeter style, in which rubber stretching is pretty common....

the engine is nuts, the coar looks liek youve put some effort into it, the sparcos are sweet..

but from a practicality point of view stretched rubber is a 'looks' thing.

im sure that if you were to take this to a track or strip, you might not be running this rim/rubber combo

as shown today at wakefield, street tyres start to disintegrate and go soggy, eventually loosing 2 sec per lap on average

this stretched tyre thing is for style and looks period... on a looks standpoint congrats!

as your an ACT drver by the looks of things I might end up seeing this in the flesh

from the last pic they dont look THAT extreme!

Let's see ........................ everything outside of the wheel protection bead, that really, is now doing SFA because the tire has been stretched to it's legal MAX!

Tell me this, WHY would you want to put a tire designed for 8" wheels onto anything more than 1/2" bigger when it stretches the sidewalls as you have?

Pull your head in mate, you've made your point. He's already pointed out thats the widest he can go without the tyres rubbing - and afaik the wheels came with the car, perhaps we should pass on the original owners details so you can send him an email preaching your opinions on tyre fitment?

Btw if you think that's stretched you've got your head in the sand.

mag86 - i'm actually in WA, the car came from ACT, you might see my old legnum super vr-4 over there though. :banana:

ghostwhinger - still going? wow, you must like your bulging tyres/muffin tops.

i don't know about you, but i wouldn't even consider a 235 to be 'stretched', as you can see the rim is contained within the tyre...

100_2798.jpg

Mate that is a sexy car - i think anyone with an R31 should be aspiring to that.

Ghostrider you sound like the JOHOVAS WITNESS of car modifiers - your entitled to your opinion and belief but honestly... get over yourself. Hop on your pushbike and knock on someone elses door.

Car looks mint, and all goes together well, doesnt look mis-matched like a lot of the other modified cars getting around.

nice line man, should go 215s..

i tried 215's and 225's on the front as the 235's rub under hard cornering, the 225's looked fine, 215's looked a bit too stretched for my liking.

ended up back with 235's all round though.. they are cheaper than 215/225's, and it only just touches the guard (which has already been rolled) on hard corners, so there is no damage to the tyre.

it's only because its quite a wide and low offset rim (9" +15) that it rubs, but i love how it fills the guards.

215/45R17 on 17x9

DSC00146.jpg

to the guy who says 235 on a 9 inch tyre is wrong,

these are my rims, i have 235/40 tyres on 9.5 inch rims with no problems what so ever.

so umm you're wrong pal, little bit of stretch not only looks awesome but allows you to fit nice rims on your car

17012009142.jpg

Edited by inthisglass

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...