Jump to content
SAU Community

Recommended Posts

Well cage wont go in mine till xmas period anyway due to funds. So for now its harness and seat, then its till cage and external engine cut off last... still got to decide where to put that. Thinking just going the pull cord method instead of switch saves cutting holes.

  • Replies 240
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hahah this is door to door racing remember....if you are not willing you get close enough to rub panels you might as well stick to super sprinting - its the getting close/direct competition that is the core of the excitement of racing. If you aren't willing to get close you will get eaten alive by your competitors who are.

And once you've tried it anything else on a race track will seem a little second rate.

POST OF THE FRIGGIN THREAD!!!!!!!!!

Seriously guys get off your arses grow some balls and do it,

If your worried about rules and regs get on the phone call a cage builder and Ask the question!

Its not going to cost you a fortune to set the car up ive said it before your driving WILL be the limiting factor to your success or failure!

In my oppinion if you need to be asking all kindas a questions and are worried about rubbing pannels etc they like Duncan said stick to supersprints where there is bugger all risk.

And seriously if your worried about cutting up a car to put a cage into it then you really should not be trying to door to door race it. If your in my way I will go under you into any turn and I dont mind you turning into my car, You on the other hand might have something to say about scratching your prefect paint job.

I binned my car into the wall at oran park a few meets ago, Decent hit green paint all over it. If your not prepared to bin the car and damage it then dont put yourself into that position!!

Perhaps a go kart would be a cheaper and more fruitfull option if your worried about your car??

The rules are not that strict your all getting worried about stupid shit that is nothing to be concerned about.

Who gives ashit about cams this and cams that. Get a cage and be done with it, I wear friggin undies and a race suit every meeting so who cares about thermal bullshit.

Your not racing for sheep stations your racing to learn the art more than anything.

GET OUT THERE AND DO IT

Edited by Risking
POST OF THE FRIGGIN THREAD!!!!!!!!!

Seriously guys get off your arses grow some balls and do it,

If your worried about rules and regs get on the phone call a cage builder and Ask the question!

Its not going to cost you a fortune to set the car up ive said it before your driving WILL be the limiting factor to your success or failure!

In my oppinion if you need to be asking all kindas a questions and are worried about rubbing pannels etc they like Duncan said stick to supersprints where there is bugger all risk.

The rules are not that strict your all getting worried about stupid shit that is nothing to be concerned about.

Who gives ashit about cams this and cams that. Get a cage and be done with it, I wear friggin undies and a race suit every meeting so who cares about thermal bullshit.

Your not racing for sheep stations your racing to learn the art more than anything.

GET OUT THERE AND DO IT

Hhaha you have twisted my arm...ill be there :rofl:

Cheers for all the help guys

POST OF THE FRIGGIN THREAD!!!!!!!!!

Seriously guys get off your arses grow some balls and do it,

If your worried about rules and regs get on the phone call a cage builder and Ask the question!

Its not going to cost you a fortune to set the car up ive said it before your driving WILL be the limiting factor to your success or failure!

In my oppinion if you need to be asking all kindas a questions and are worried about rubbing pannels etc they like Duncan said stick to supersprints where there is bugger all risk.

And seriously if your worried about cutting up a car to put a cage into it then you really should not be trying to door to door race it. If your in my way I will go under you into any turn and I dont mind you turning into my car, You on the other hand might have something to say about scratching your prefect paint job.

I binned my car into the wall at oran park a few meets ago, Decent hit green paint all over it. If your not prepared to bin the car and damage it then dont put yourself into that position!!

Perhaps a go kart would be a cheaper and more fruitfull option if your worried about your car??

The rules are not that strict your all getting worried about stupid shit that is nothing to be concerned about.

Who gives ashit about cams this and cams that. Get a cage and be done with it, I wear friggin undies and a race suit every meeting so who cares about thermal bullshit.

Your not racing for sheep stations your racing to learn the art more than anything.

GET OUT THERE AND DO IT

Not sure you your having a dig at here, first of all you tell us how good mra is and how we should get into it, then people post in here asking stuff, trying to get more info to help them get to MRA, and you say grow some balls and get out there, but you dont want to ruin your car so dont...

bit confused.

anyhoo - reason I havent done it yet is simple fact of FUNDS.

Not really a dig at anyone just frustration.

Its really not hard to get into, but when you get all wrapped up in the rules and analyise everything so much its really not nessisary. Just get it caged and go racing. Its budget entry level motorsport. Your not going to get raped by the scruits for not having a 3 layer/fireproof garment blah blah.

You dont need the most expensive seat or harness you need none of that just get out and learn to drive.

I realise there is funds issues I can appreciate that, your pretty much set to go chris the car is fine.

On the whole car thing its true Chris. I Read something about someone not wanting to damage a car, thats all well and good no one wants any damage but you gotta accept what your about to start doing and be prepared to excahnge paint if it happens.

Yer i am super keen and have been ever since i talked to Waldo.

I have been on a mission saving and spending my ass off trying to get my shit together so i can do the whole season next year. So far i have ordered about 1/3rd of the required parts no real exciting bits just wear and tear stuff, canceled my rego, purchased a car trailer and i pick up my new/second hand tow bitch tomorrow woohoo V8 Power hahaha.

Just need to make some room in the shed over the next few weeks then i will be flat out pulling her apart and sending it off to get some chassis work done and a full weld in cage put in. I am so excited. :P

I was hoping to take it to the Bulahdelah hill climb as its first outing but it will most likely be the SAU day at OP south.

Next year will kick ass, we will have Chubs, Ando, Brad and my self from SAU. Hell yer.

Not really a dig at anyone just frustration.

Its really not hard to get into, but when you get all wrapped up in the rules and analyise everything so much its really not nessisary. Just get it caged and go racing. Its budget entry level motorsport. Your not going to get raped by the scruits for not having a 3 layer/fireproof garment blah blah.

You dont need the most expensive seat or harness you need none of that just get out and learn to drive.

I realise there is funds issues I can appreciate that, your pretty much set to go chris the car is fine.

On the whole car thing its true Chris. I Read something about someone not wanting to damage a car, thats all well and good no one wants any damage but you gotta accept what your about to start doing and be prepared to excahnge paint if it happens.

Fair Call, What I meant was re: damaging the the car, is that both mine and Andos are still registered, so cutting the dash was somthing I didnt want to do, however If it has to be done it has to be done, I dont care about body work as my car is look like its gone 10 rounds against George foreman.

The questions regarding the seats, Harnesses and suits...well...if you have a look at the MRA site there is no clear cut info on whether they could be a 30 dollar ebay 3 point harness or needed to be somthing decent.

What I didnt want to do was turn up to a round in the car and get turned away cause my seat isnt FIA approved etc.

Yer i am super keen and have been ever since i talked to Waldo.

I have been on a mission saving and spending my ass off trying to get my shit together so i can do the whole season next year. So far i have ordered about 1/3rd of the required parts no real exciting bits just wear and tear stuff, canceled my rego, purchased a car trailer and i pick up my new/second hand tow bitch tomorrow woohoo V8 Power hahaha.

Just need to make some room in the shed over the next few weeks then i will be flat out pulling her apart and sending it off to get some chassis work done and a full weld in cage put in. I am so excited. :P

I was hoping to take it to the Bulahdelah hill climb as its first outing but it will most likely be the SAU day at OP south.

Next year will kick ass, we will have Chubs, Ando, Brad and my self from SAU. Hell yer.

I dont think ill be aloud to enter next year, Jay will be running campaining the same car I am currently using but I think somehow they will frown upon sub 60 second cars racing at this event.

Im looking to do the state sports sedan series instead next year. Or taking the year to build another space frame after Ive learnt from the current one im building.

Its funny you mention that Chris.

My old Grey GTR has just been on sold to someone else and im preparing it to run the MRA. Jay will be using my current GTR in the MRA and I may have another GTR in the pipe line that ill bring out to run sprints and MRA with. Depends on alot of things but yeah it may be a possiblity to have another car to use.

Plus there is old mate boz who's S13 were getting ready to go racing with too.

That will be a little ball tearer with him behind the wheel thats for sure

Atleast two of my ex cars will be competing

Edited by Risking

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...