Jump to content
SAU Community

Recommended Posts

ok so im a chick n i need some help please i have a pretty worked 13 second skyline...i got pulled over n im gettin done for my front mount, oil catch can, exhaust and pod filter. What he didnt see was my haltech comp hiding under my dash....so im over the whole going fast thing any way i was wondering what is the easiest way to make my car r33 gtst as standard as possible.....

post-58788-1241360672_thumb.jpg

ok so im a chick n i need some help please i have a pretty worked 13 second skyline...i got pulled over n im gettin done for my front mount, oil catch can, exhaust and pod filter. What he didnt see was my haltech comp hiding under my dash....so im over the whole going fast thing any way i was wondering what is the easiest way to make my car r33 gtst as standard as possible.....

front mount??

catch can???

pod filter????

exhaust, find someone with a stock one in their backyard and borrow it :D

as for the haltech i guess you just hope they dont physically check the ecu, there arent any stickers anywhere that would get them suspicious?

ok so im a chick n i need some help please i have a pretty worked 13 second skyline...i got pulled over n im gettin done for my front mount, oil catch can, exhaust and pod filter. What he didnt see was my haltech comp hiding under my dash....so im over the whole going fast thing any way i was wondering what is the easiest way to make my car r33 gtst as standard as possible.....

It would be easier to get your car passed the emissions test and engineered. You don't need to change parts then. Its better. Nothing better then being pulled over and handing over your paper work with a big f**k YOU, cop this one sideways.

  • 5 weeks later...

You can't high mount turbo. You need to get Stock manifold, Stock turbo, Stock exhaust, Stock Air box with intake pipe and run breather into it. With the ECU system you might be able to get away by tunning to close to stock emission level. Its going to need lot of work to pass EPA.

Goto www.epa.vic.gov.au and read through their modification guids.

I'll think you will find the EPA makes no mention of manifolds. :)

You can actually high mount a stock turbo, same as an aftermarket low mount manifold.

I passed with a low mount non-factory manifold.

Although, he has an aftermarket turbo, so thats fairly unlikely to pass - i agree.

Fk laws between states are shithouse

Such little consistency

Yeah in NSW we don't have the "one intake mod" law. if you have any mod to the intake you have to get it engineered.

So any R33 gtst with a front mount can get done for emissions or even a car with just a pod.

But we get free emissions tests so there is no excuse i guess.

A bit offtopic, but you guys in Aussie get so reamed compared to us here in NZ.

Ive got a 300kw engine in a car that originally had around 100 and have little problems getting a normalwarrant of fitness done every 6 months.

I hope it doesnt turn out like that here.

A bit offtopic, but you guys in Aussie get so reamed compared to us here in NZ.

Ive got a 300kw engine in a car that originally had around 100 and have little problems getting a normalwarrant of fitness done every 6 months.

I hope it doesnt turn out like that here.

X2. Theyre pretty good here. Only thing really is noise and external vented gates.

OT, is 13 seconds what we call a 'worked' Skyline now? If so, my Stock turbo Skyline is HELLA worked!

. What he didnt see was my haltech comp hiding under my dash....

Hang on, whats wrong with the po po seeing the Haltech ecu?

Is it illegal to have a piggy back or any aftermarket ecu for that matter?

talk to matt at hitman injection tuning. he can tune it to pass through emissions testing - likes haltech too - and has access to people who can make the catch can etc legally installed ie plumb back. also ask him who can do an engineer's report for the mods. my report was $600 plus $1000 for the tune - bugger all compared to the cost of making it stock all over again and having stock performance.

Hang on, whats wrong with the po po seeing the Haltech ecu?

Is it illegal to have a piggy back or any aftermarket ecu for that matter?

In NSW - you need to get tested

In Vic - its simply illegal all the time (effort to get it tested/legal in vic borders on the impossible for the common man)

It would be easier to get your car passed the emissions test and engineered. You don't need to change parts then. Its better. Nothing better then being pulled over and handing over your paper work with a big f**k YOU, cop this one sideways.

I was under the impression that in NSW, a standalone ECU is never 'legal', even if you get it emissions tested, due to the fact you can alter the tune/ mixtures at any time. (Potentially making your emissions test irrelevant.)

Also, from what I understand, an engineering certificate wont get you off a defect notice for an exposed pod filter/ atmospheric BOV/ vented catch can/ exhaust too loud as they are strictly non ADR compliant. (and cannot be made compliant)

I may be wrong here, feel free to correct me!

(Not a stab at you Guilt-toy, just throwing a spanner in the works)

engineers report is not the do all end all anyway. they can still refuse something if they see a problem with it. and like said. that turbo instantly got you up sh*t creek.

ecu must be standard. If they even suspect your ecu is tampered with (remapped) and cannot prove anything they can (and do) request a full report from nissan to certify it's settings $$$$$.

anything that can be altered ie:

coilovers (eng cert and modification making them unable to travel lower than legal height under full loaded car.)

boost controller (same deal. much more involved as lowest level of boost and highest level would have to be emissions tested and the unit also locked so that it cannot exceed engineered limits.)

you can have any modifcation you want so long as it's engineered, emissions tested and modified in a way that it can not be altered/programmed any different to what your certificate states.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...