Jump to content
SAU Community

Recommended Posts

yer those sp1's look pretty phat

guess its hard to go wrong with te37s

It's pretty easy to go wrong with TE37's actually, if you get weak offset they'll look very average.

na, TE-37's look shite on gts-t's / gtt's, not enough offset to get depth into the spokes. GTR only, same with LM-GT4's

Buy lower offset....problem solved

i agree totally dezz... just as long as those who go ahead and buy the lower offset realise that they may have clearance issues and are gonna have to allow for that in tyre selection, suspension and possible guard mods :closedeyes:

dayum thats hot. black and red is a awesome colour scheme. i wish i had a red skyline :P

you can.... its a respray :)

Hi there for a cheaper option I would recommend the koya drifttechs which are a multifit option 5stud for both nissan and holden and a 4 stud for 4x114.3

driftek's are 4x114.3/5x114.3 and will suit most jap cars, and falcons... commodore's are 5 x 120

I love my xd9's :)

If I didnt want to spend a fortune on wheels, I would buy some drifteks/Rotas, the rotas are better they have more concave, nice offset will look fantastic

or buy 2nd hand jap rims for the same price.... i got my professors for 2300, flawless, with 2k worth of rubber on them

*pic of blags car removed cause this post will be way too big anyway*

looks sweet as dude.... knock out some camber on the rear and it will peform/look better again!

No, its just when people put weak offsets on GTS-t/GT-t's are too weak to do any guard mods or put any effort into making good offset wheels fit. Low offset (or GTR offset, god i hate that term!) TE37's can easily fit a R33/R34, check out the S13 below. It runs 17x9.5 +12 front and 17X10 +18 rears and a S13 has much smaller guards than a R33/R34

+1 the term gtr offset shits me too as it only looks good on gtst's

and that s13 is phat... te37's will never look good without any guard work, that's the nature of the beast, but when done well they look HAWT!

JMS r33 looks good

only bad thing for most people is that r33's have those crappy wheel arches that don't look right with a flare, unless you are willing to get your rear guards flared and resprayed so you can fit some low offset wheels

hey blags

apart from the 20mm spacers did u have to do and guard mods on ur 33

cheers Nick

They didn't require 20mm spacer to fit, if that's what your asking.

The rear guards have been rolled.

The front had 20mm spacer too but with no camber they were scrubbing no matter what I did. I have taken the spacers off till I get some camber arms

i have incubus Paranormal 18# black one but they look so good it is not funny i dont have a pic of my car with them on but here is a link to the wheels http://superbuytires.com/Incubus/Paranormal/

If you guys are talking about the picture I posted up then yes, they are CST Hyper Zero's but it is an R33 sedan. Maybe the eyelids on the headlights put you off?

na realised it was a 33, but i thought they were weds sa-70's with a huge offset.... my bad

post-12522-1242860355_thumb.jpg

i have incubus Paranormal 18# black one but they look so good it is not funny i dont have a pic of my car with them on but here is a link to the wheels http://superbuytires.com/Incubus/Paranormal/

Kill%20it%20With%20Fire%20Aliens.jpg

They didn't require 20mm spacer to fit, if that's what your asking.

The rear guards have been rolled.

The front had 20mm spacer too but with no camber they were scrubbing no matter what I did. I have taken the spacers off till I get some camber arms

hey dude

wat are your size/offsets that dish on the bac looks sick

i have incubus Paranormal 18# black one but they look so good it is not funny i dont have a pic of my car with them on but here is a link to the wheels http://superbuytires.com/Incubus/Paranormal/

DO NOT put those on a skyline!

not even a holden deserves that sort of punishment!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...