Jump to content
SAU Community

Recommended Posts

Hey guys

Got some stuff lying around I need to get rid of.

1. Standard RB25det Intake manifold (upper & Lower)

No injectors, thottle body AAC valve or any accessories, just the lower runners and plenum, will come with the upper gasket.

$50

2. Standard Fuel Reg off RB25det

$40

3. 3" Mild steel X-force Dump/Front pipe, Suits R32 and R33 Gtst With a standard Turbo

$50

4. 2x Weds sport Tc-005 17x7 +30 5x114.3 Wheels in charcoal Wont clear skyline front brakes with out a spacer, come with tyres that would only be good for skids.

$100 for the pair

5. 2x Rays Volk GT-P Daytona 18x9 +40 5x114.3 Painted black whith silver lip, fair bit of gutter rash, No tyres or centre caps

$90 for the pair

6. RB25det Factory Exhaust Manifold, Has one broken stud

$40

7.Factory Exhaust Manifold Heat Sheild, Needs a coat of paint

$20

8. Unused KKR BOV, Ive lost the spare springs it comes with. Going to use my HKS Sqv

$40

All Items are Plus postage or are avaliable for Pick up From Goulburn, How ever I am willing to meet half way if you're from sydney or canberra

Thats It for now.

Pics will be up tommorw

Andrew

Link to comment
https://www.sau.com.au/forums/topic/269076-skyline-gear/
Share on other sites

MRRight - Pm sent

post-16947-1241784309_thumb.jpg

heres a pic of the wheels untill i can get some close ups.

the Wed Sports are on the front, the Volks on the rear only differnce is the Volks are dodgily painted blacknow

Link to comment
https://www.sau.com.au/forums/topic/269076-skyline-gear/#findComment-4583197
Share on other sites

Didnt get a chance to grab my camera today...was busy with the car.

Got a couple of phone pics of the dump / front pipe a lot of people are keen on.

Also have the standard oil feed line and the water line that goes into the block, had to butcher the water feed from the manifold so i dont have that.

Ill take $20 + postage for both lines and im pretty sure ive got the banjo bolts to include with it aswell.

Got a few more engine bay related items such as a couple of AC lines, the AC pump. TBH I have no idea if they work. Ill get a couple of pics tommorow

Thanks

post-16947-1241854017_thumb.jpg

post-16947-1241854063_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/269076-skyline-gear/#findComment-4584263
Share on other sites

  • 5 weeks later...
  • 1 month later...
Hey guys

Got some stuff lying around I need to get rid of.

1. Standard RB25det Intake manifold (upper & Lower)

No injectors, thottle body AAC valve or any accessories, just the lower runners and plenum, will come with the upper gasket.

$50 $35

2. Standard Fuel Reg off RB25det

$40 $30

3. 3" Mild steel X-force Dump/Front pipe, Suits R32 and R33 Gtst With a standard Turbo

$50

4. 2x Weds sport Tc-005 17x7 +30 5x114.3 Wheels in charcoal Wont clear skyline front brakes with out a spacer, come with tyres that would only be good for skids.

$100 for the pair

5. 2x Rays Volk GT-P Daytona 18x9 +40 5x114.3 Painted black whith silver lip, fair bit of gutter rash, No tyres or centre caps

$90 for the pair $50

6. RB25det Factory Exhaust Manifold, Has one broken stud

$40 $30

7.Factory Exhaust Manifold Heat Sheild, Needs a coat of paint

$20

8. Unused KKR BOV, Ive lost the spare springs it comes with. Going to use my HKS Sqv

$40

All Items are Plus postage or are avaliable for Pick up From Goulburn, How ever I am willing to meet half way if you're from sydney or canberra

Thats It for now.

Pics will be up tommorw

Andrew

Prices Revised

Also RB25det Block and crank, 86.5mm bore, reeds a rebore to 87mm, crank still looks good, reground to suit +50 rod bearings and +25 mains.

$60 Pick up only please,

ACL 86.5mm Forged RB25det Pistons, 8.5:1, only 4 are usuable, good for spares, comes with standard 25det rods (6 of) - $50

Link to comment
https://www.sau.com.au/forums/topic/269076-skyline-gear/#findComment-4744832
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...