Jump to content
SAU Community

Recommended Posts

Hey guys,

i was drivin home last nite. as i was turning a corner i heard a strange noise. sounded a lot like miss-fire, i could feel a vibration coming from the engine bay. I figured my coilpacks had finally gone. I was only a few mins from home and had to go to work so i figured ill drive it slowly home. the noise would go and come back, the car had no power at all. then as i turned into my street the noise when and then all of a sudden there was a loud winding noise, the higher the revs the louder it is. sounds like turbo wheel is scrapping against something. and its def comin from the turbo side... and im only getting vac no boost!!

anyone had this happen...???

good thing i was looking into getting a high-flowed turbo anyways lol

i've got the basic mods:

fmic

turbo back stainless 3' with no cat

pod filter

safc

was making 190rwkws at 12psi

and thats all i really wanted for street use.

can u guys help me choose a new turbo, since im upgrading it would b nice to have round 220rwkws on a safe tune, i was looking at the

GT3076

or getting mine highflowed by Hypergear - around $800 and comes with 12mnths warranty

i dont want anything big and laggy and so i have to spend another 3k changing injectors, ecu...etc

im happy to spend around 1k.

any advise would help.

Thanks guys

Adam

Link to comment
https://www.sau.com.au/forums/topic/269359-i-think-i-blew-my-turbo/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...