Jump to content
SAU Community

Recommended Posts

hey guys

i have to design a car for a make beleive customer in VCD

a hotted up version of the R35

for now it will be stroked to 4.0 litres

twin turbo, titanium exhaust.( thats it as not much engine detail is needed)

but i need detail for the body, brakes, rims

rims will most likley be a mix of ce28n and R35 GTR stockies

body will be either gun metal pearl or spark silver

carbon pumped guards, re-worked intakes etc

would be nice if you guys can voice your ideas and ill try and include it in the design :happy:

cheers!

Link to comment
https://www.sau.com.au/forums/topic/269516-r35-gtr-m-tune-ideas/
Share on other sites

nah man, your doing it all wrong!!!

take a daewoo matiz, flare the guards a bit, lower it, tint it, millenium jade body colour, chuck a viper twin turbo v10 (hennessey tuned), 6 spd borg warner transmission, enzo brembos and discs front and rear, titanium exhaust, change rims and tires of your choice - keep rest stock as a rock

now thats a sleeper!!!!

nah man, your doing it all wrong!!!

take a daewoo matiz, flare the guards a bit, lower it, tint it, millenium jade body colour, chuck a viper twin turbo v10 (hennessey tuned), 6 spd borg warner transmission, enzo brembos and discs front and rear, titanium exhaust, change rims and tires of your choice - keep rest stock as a rock

now thats a sleeper!!!!

Funny thing is I used to have a Daweoo Maiz Van and I always though it would be an awesome go kart with a BIG engine in the back of it :D

heres the first generation draft of the front

constructive critizism please :)

i know its a bit out of proprtion and wonky but its a draft

its got z-tune style front vents

flared guards

the back will have GT style rear guards

stock wing with a carbon blade

+ heaps heaps more

ill update this thread as i go

post-54148-1242292744_thumb.jpg

are you going to put it into Illustrator and finish on the computer or keep it hand drawn?

if you go hand drawn get yourself a lightbox or just a glass table with lamp underneath... throw some ruled lines on it as well so you get everything straight etc or even trace a pic of an actual R35 and use that as a template

keep laying a new sheet over it and re drawing it, trying different stuff as you go

looking good though, don't forget to try different things and keep all the drafts (they like that, shows how much work you've put in)

maybe try to tuck the spoiler in at the bottom and give it heaps of offset up front so you can see some tyre... R35's can't take much offset up front so I like where your going with the Z tune guards etc... good work, always helps to do projects on stuff your genuinely interested in

thanks guys!

it did come out looking alot better.

ill phtoshop it in the end.

im onto my final draft now.. FOR THE FRONT. i still have the back and sides :P

its got a new carbon lip with R32 GTR style vents in it

it did come out alot better looking then i thought.. mebe nissan can give me a job....

i have exams in 2 weeks

someone help me

yep its definitely getting there... just have a look at the roof line, it needs some smoothing... also might be nice to add some reflection to the windows... put a thick white line through the middle and some warm/earth shades below the line and some cool/sky shades above the line (sorry I couldn't find any examples)

also don't be afraid to really push your shading... work out where your light source is and give the areas in shade a fair bit of darkening... this will give it shape (helping to show the flare on your fenders), especially as you are rendering from side on and not 3/4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...