Jump to content
SAU Community

Recommended Posts

Oh dear.

Look it is all bollocks.

At Wanneroo:

The fastest lap time in the 1990 race was Jim Richards at 60.3 seconds.

In 1991 it was Mark Skaife with a 60.42.

In 1992 Jim again with 59.71.

These days the V8's get around the track in a much quicker time. In last years final race (ie when everyones control tyres are stuffed) the winner (Winterbottom) managed a 57.7 second lap. He qualified with a 56.4.

The reality is that at just about any circuit in Australia the Gt-Rs times would put it on the last row of a present day V8 grid.

The other thing you will notice about the old race fottage is how few cars there are in it....

Look I love the GT-R's as much as anyone. Hell I own one. But lets not be too sentimental about Group A racing - the racing was mostly rubbish. Usually nothing would happen until Tony Longhurst (BMW M3) would punt John Bowe (Ford Sierra) off the circuit when his tyres went away.

The only reason the 1991 race time record still stands is you get a safety car about every ten laps these days. The old record stays because a quirk of fate meant they didn't get many safety cars in 1991. Unlike 1992, for instance.

Lastly 650rwhp? Where did that number sprout from? No one has ever claimed the Group A cars ran that kind of horsepower.

Edited by djr81

That was epic. I was just the other day looking at some Bathurst racing with the GTR. Thanks

Since mark skaife retired, and he was on Top Gear AU, he said he rolled a GTR once in a race, which I wanna see.

The narrator says 2.5L twin turbo charge inline 6 cylinder engine? WTF 2.5L. But yeh 650 hp, thats awesome.

http://www.youtube.com/watch?v=d2Q3f7r_BPE Yeah, 620 hp.

I wonder what the R31's were running? HR31 GTS-R? with a redtop RB20DET? 500hp? The sierra's left them behind...

Edited by reNEGaDe88
That was epic. I was just the other day looking at some Bathurst racing with the GTR. Thanks

Since mark skaife retired, and he was on Top Gear AU, he said he rolled a GTR once in a race, which I wanna see.

The narrator says 2.5L twin turbo charge inline 6 cylinder engine? WTF 2.5L. But yeh 650 hp, thats awesome.

http://www.youtube.com/watch?v=d2Q3f7r_BPE Yeah, 620 hp.

I wonder what the R31's were running? HR31 GTS-R? with a redtop RB20DET? 500hp? The sierra's left them behind...

You won't see it. It was a support race for the Australian Grand Prix - at Adelaide. Channel 9 may have broadcast it, but I doubt it. The car was comprehensively fkd. The right front corner all squashed in & the roof somehwat lower than it should be. Inside the car bars are all bent & busted.

The Group A cars were governed by tight rules with regard to turbos. Also the turbo tech in the early 90's was nowhere near as good as now. In any case the gearboxes on the r31's were rubbish - a very common cause of DNF's. They would not have handled any more horsepower than they had - arguably the couldn't handle that properly anyway.

The fastest lap time in the 1990 race was Jim Richards at 60.3 seconds.

In 1991 it was Mark Skaife with a 60.42.

In 1992 Jim again with 59.71.

These days the V8's get around the track in a much quicker time. In last years final race (ie when everyones control tyres are stuffed) the winner (Winterbottom) managed a 57.7 second lap. He qualified with a 56.4.

Even I managed to get around Wanneroo in 59 seconds in a rev limited formula ford.

That was epic. I was just the other day looking at some Bathurst racing with the GTR. Thanks

Since mark skaife retired, and he was on Top Gear AU, he said he rolled a GTR once in a race, which I wanna see.

The narrator says 2.5L twin turbo charge inline 6 cylinder engine? WTF 2.5L. But yeh 650 hp, thats awesome.

http://www.youtube.com/watch?v=d2Q3f7r_BPE Yeah, 620 hp.

I wonder what the R31's were running? HR31 GTS-R? with a redtop RB20DET? 500hp? The sierra's left them behind...

You won't see it. It was a support race for the Australian Grand Prix - at Adelaide. Channel 9 may have broadcast it, but I doubt it. The car was comprehensively fkd. The right front corner all squashed in & the roof somehwat lower than it should be. Inside the car bars are all bent & busted.

The Group A cars were governed by tight rules with regard to turbos. Also the turbo tech in the early 90's was nowhere near as good as now. In any case the gearboxes on the r31's were rubbish - a very common cause of DNF's. They would not have handled any more horsepower than they had - arguably the couldn't handle that properly anyway.

A large part of the 1990 atcc was raced (and won) in the hr31 wasn't it - I also recall a quote by Jim saying the cars were exceptionally reliable?

In any case, at the time everything in the world was being left behind by the Sierra's so the old rwd hr31's did ok to get the wins they did :happy:

btw 8min 48sec :(

Edited by DCIEVE

The R32 GTR's at Bathurst in the early 90's were hitting OVER 300km/h along Conrod Straight. I have sh*tloads of video footage on my home PC of the whole Bathurst races from 1990-91 focussing on the GTR's :P

A large part of the 1990 atcc was raced (and won) in the hr31 wasn't it - I also recall a quote by Jim saying the cars were exceptionally reliable?

In any case, at the time everything in the world was being left behind by the Sierra's so the old rwd hr31's did ok to get the wins they did :D

btw 8min 48sec :P

Yes the 1990 ATCC was basically won in an R31. Mostly it was due to the unreliability of the DJR Sierras rather than the speed of Freddo's cars.

The R31 started out with approx 370hp in 1988 & evolved to a reputed 460hp in 89.

Their finishing record in endurance racing was lamentable. Mostly it involved gearboxes giving up the ghost. From memory they did Bathurst twice in the R31 - 2 x DNF in 1988 & then in 1989 3rd & 4th (albeit a lap down).

At Sandown in 1988 they had 2 cars DNF, in 1989 they managed 1st & 3rd for their only win & in 1990 they didn't bother to turn up.

Ofcourse the R32 ran at Bathurst in 1990. But if DNF'd there too.

come on guys the music says it all ""its simply the best, better than all the rest" lol an the nissan gtrs got banned from the races didnt they coz they won so many races an no1 could catch up or some shit. the 620hp was a flywheel reading goin threw 4 wheels loose abit mayb around say 570 but none the less mass amounts of power :blink: gotta love it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...