Jump to content
SAU Community

Recommended Posts

Shouldn't be to hard a car to build, its been done plenty of times before, I've got a mate putting a SR in his ceffy. keen to see it in action.

Do you own the Hilux with TONKA on the plates?

the problem with using gtr shell tho is that u cant use the sr cross member

an yeh tonka is my other money pit

actually if he chucks in the RWD front cradle and does away with transfer case it will weigh less than a standard R32 RWD car

GTR's are only heavier due to transfer case and extra front shafts CV joints and all the bits and pieces to make em AWD

Finally someone with brains has posted!!

Weight will be distributed nicely with a SR, and have no problems with the power, You should see if TT have got or can get hold of some corner weights Dan, that way fuel pumps, battery and so fourth can be mounted keeping the weight distribution in mind.

Anyways mate, thinking outside the square.....I like it!! :P

interesting choice dan.

looking for a toy too now that i've sold the skyline but not looking to spend as much as u, only about 5k max.

Think either an s13 to do motorkhana's and hill climbs or trying to find a stock datsun 1200, leaning towards the s13 as i can probably have more fun in that and the 1200 has so far been very hard to find.

yeh dan like I said to ya when u rang me n told me when ya got the gtr shell n told me what the go was...

think its wayyyyyyyyyy left field!!!!!! and might even possible work haha

that aside ill still call you a fag for using the SR for now haha!!

but should be alright buddy when it all done :P

as long as you put some tuff jap rims that have fitment on them :(

cant wait to get out to a hillclimb buddy n we do some runs :devil:

-Benji

Edited by Benji

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...