Jump to content
SAU Community

Recommended Posts

hi guys. i have my R34 GTT NEO Plazmaman plenum inc a 72mm Throttle body up for sale as ive upgraded to a rb26.

some info from the plazmaman website.

Easy bolt on item , it eliminates all those ugly water lines and wiring that sit on top of the motor near the fire wall , and gives the engine bay a clean look. The OEM throttle bodies are big huge ugly items and therefore cannot be reused due to their physical size. Power increases of 20 + hp and torque increases across the whole rev range just by bolting it on

I made 330rwkw with this plenum and a gt35r seeing full boost by 4,000RPM which is amazing response.

Has only been on the car for about 2 months so almost brand new.

THROTTLE%20BODY%2010.jpgTHROTTLE%20BODY%208.jpg

TBODY%201.jpgTBODY%203.jpg

Normally priced at $1600 im looking for

$1300!!!

no one wants a quality plenum?

its possibly the best solution for us r34 ownerrs. because they use the existing long runners to maximize response, which is where greddy and other plenums fail.

come on guys!!!

I don't know if it's a direct fit but I compared it to a friend go runs a r33 plenum and the only difference were the bolts from wat I could see.

To be 100% sure you'd best call Plazmaman and ask

question as this has my interest as this is in my next line of mods. but the OEM setup has two butterflys for traction control. how does this work with that as id still like to keep my traction control option. also any pic of the under side?

ta

Ash

I honeatly would not know about traction control. I didn't bother with the hassle as I was pushing 380rwkw. No traction control was gonna work. I guess I can get in contact with Plazmaman and ask but you might be better off doing that yourself justincase you have more questions.

I'll get started on the kicks first thing Monday.

can you give me a price ?? got a mate comin over with his 34... going to check if they are the same

kind regards

Dean

the price is $1300, and will be neg if the buyer is serious.

shoot me a pm and we can talk buddy.

anyone else who is interested, please shoot me a PM as i have to many dreamers and low ballers wasting my time.

Thanks

Hrmm well dean do you have msn?

Sorry about the hassles, you wpnt beleve how many time Wasters there are. I shot u a pm with my details. I your serious get back to me

Edited by Jap_Muscle

I'm also keen on the throttle body. I have a plazmaman plenum allready, so the throttle should bolt straight on correct?

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
×
×
  • Create New...