Jump to content
SAU Community

Recommended Posts

Lol where would i get one of them from though? I dont mind cutting the trim, im sure i can do a decent job of it. But i might just mount the gauges as they come, they have their own mounts or i can buy a holder. I would prefer a holder, they look better, but if its that much harder then ill just mount them on the top dash with their stock mounts

They pop up on ebay a fair bit, and in the SAU for sale section.

This might be a noobish question, but will this work if using a piggy back system such as the eManage Blue? I would imagine that the data coming from the ECU would be data before being remapped by the eManage and therefore probably wouldn't show correct data on the ecu talk... or am I mistaken? Looks like something I might add to my future mod list if it will be compatible.

it reads what the ecu sees. so if the ecu is being tricked into believing lower AFM volts, then it will show the lower AFM volts (and if thats the only signal intercepted/modified, wont make much difference). outputs like injectory duty % will be unaffected.

I got Water temp, oil temp and oil pressure in the Defi BF series. Pretty sure they are legal there also.

See thats probably what im gonna end up doing, just mounting the gauges without a holder, same place you have them. Is that cable going into your aircon vent from the gauges? Or how did you get the wiring through the firewall?

it reads what the ecu sees. so if the ecu is being tricked into believing lower AFM volts, then it will show the lower AFM volts (and if thats the only signal intercepted/modified, wont make much difference). outputs like injectory duty % will be unaffected.

i think you may find that injector duty may be different. the SAFC is just a afm signal bender, but others like the emanage can alter the injector rates without just bending the afm signal (which also results in a timing change). the emanage just intercepts the injector signal from the ecu to the injector then alters it a bit to get the required injector duty.

ahh yeah if it also modifies the injectors or timing (if thats possible) then those outputs will also be inaccurate. but with that much 'trickery' going on, i wonder if it wouldnt have been much better to get a daughterboard/remap/nistune type setup.

back on topic, ive actually thought of making a digital gauge that hooks up to the consult port and allows you to set it up to read one of the readings (be it water temp, speed, volts, etc). e.g. a 4 digit LED display with decimal point. mainly because people are used to mounting gauges and not so much mounting rectangular displays. if only i didnt have a real job i might have made it already :P ive been too slack on updates to the LCD display anyway, so thats first priority.

See thats probably what im gonna end up doing, just mounting the gauges without a holder, same place you have them. Is that cable going into your aircon vent from the gauges? Or how did you get the wiring through the firewall?

Goes through the air con (had to drill a small hole) then into the controller unit (near my left knee area). The only wires which go through the fire wall are the ones for the sensors, and they go through the bit just above the accelerator.

  • 2 weeks later...

Dammit, all this gauge talk has got me looking into supplying them again. I did have everything ready to go with being a supplier for SAGA and Swoosh but the LEDs got me too busy. I've contacted them again so may go ahead with it. Get the car back to commercial jet form :banana:

Yeah no problem, funny though I just found some stock from a while back, the SAGA/Swoosh equivalent of the Defi Link series.

gl-boost.jpg

I should put them up for sale. Boost Gauge, Exhaust temp gauge, oil pressure gauge and oil temp gauge. They all daisy chain together and come with a remote control (instead of the control unit DEFI uses) and include all sensors :P

They've only ever been out of the box to see what they look like, then forgotten about in the garage.

  • 2 weeks later...

Dammit, you guys have started me ricing it up again :)

How's this, fits perfectly where the "useless" lighter was, it's RFID so knows when the driver is in the car....has a nice Aluminium bezel so matches the interior well.

1 push = Acc

2 pushes = On

or

Foot on brake and 1 push - Ign!!!

start.jpg

looks good dan! Almost looks like its meant to be there. I use my cig lighter though for my GPS though that's an easy work around.

Yeah, you can get those cig lighter extender things with two of them on, can go in the ashtray (where the lighter should be anyway)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...