Jump to content
SAU Community

Recommended Posts

OK folks, with the final results accounted for and after much deliberation, I’d like to present the first SAU-SA Club, Board of Committee Members.

Without going into too much detail, I polled outright for 2 positions but unfortunately can’t (for obvious reasons) fulfil both positions. I’ve therefore taken into consideration all votes and who I agree would better represent the two positions then taken a step back. In consideration of the remaining votes and by unanimous decision by the new President and Secretary, I’ve accepted the offer of another position in the committee.

Here is the 1st SAU-SA Club Board:

Shane (RBWARE) - President

Shane has previous club experience, public recognition, knowledge of the motorsport industry and the persona that the club needs if it is to get off the ground successfully.

Pete (SLED) - Vice President

Ruby (RubyRS4) - Secretary

This is a hard position to fill and a very important one. It’s a “no brainer” that without all the very hard work that Ruby has put into getting this thing off the ground (not to mention all the rubbish that he’s had to put up with), that he would be perfect for this role and to be honest, if he didn’t accept this position, we’d be scratching our heads right now.

Nene (Nene260RS) - Treasurer

Nene is a popular choice for this position. Working in a bank makes this a “no brainer” as well. Although Nene will have her hands full with a new arrival in a few months, Ruby and others have offered their full support behind her.

Cara (Miss34) - Events Coordinator

Cara was an outright vote getter for this position obviously by the fact that she has the runs on the board with her organizational skills and enthusiasm to make things happen.

Damo (Damo-R34) - Web Design/Editor

Damo has shown enthusiasm and has the resources that he can pull from to fulfil this position well. The fact that he has shown eagerness, a determination to be involved and maturity beyond his years, tells me that he’ll be an asset.

Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/
Share on other sites

Congrats to all on the Committee ... and congrats to all who joined and who cast their votes. You're all still an important part of it, and without your support there would be no club. :D

Now that we have names of Committee members, we can now start getting forms in for CAMS affiliation, bank account, etc. I'll give Directors a call tomorrow and book a table/room for (say) 7.30pm next Friday (5/6/2009)? There will be much to discuss, and much for the club to offer its members.

Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/#findComment-4623152
Share on other sites

I'll give Directors a call tomorrow and book a table/room for (say) 7.30pm next Friday (5/6/2009)? There will be much to discuss, and much for the club to offer its members.

Congrats to the chiefs voted in, and good luck with it all!!

Ruby, As we have our monthly meeting at the Directors, i would suggest to them that you will be looking to hold a meeting on, for example every 3rd tuesday of the month or something like that, book it in early and everyone in the club will know when the meetings are and have no excuses for missing it, Just a suggestion!

EDIT: oh and thats the room upstairs, ours is every 4th monday in the month, you might want to make yours every 4th Tuesday and they can leave the tables out!!

Edited by Deluxe
Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/#findComment-4623202
Share on other sites

Ruby, As we have our monthly meeting at the Directors, i would suggest to them that you will be looking to hold a meeting on, for example every 3rd tuesday of the month or something like that, book it in early and everyone in the club will know when the meetings are and have no excuses for missing it, Just a suggestion!

EDIT: oh and thats the room upstairs, ours is every 4th monday in the month, you might want to make yours every 4th Tuesday and they can leave the tables out!!

Thanks for the tip Deluxe. I'm planning our first pow-wow (not really an official monthly meet, but a meeting in any case to intro the team and talk about the to-dos), hopefully next Friday. But I'll contact the others first and find a suitable time for all. Then I'll run past them what you've mentioned and see how it fits in with all. One problem is my studies, which can fall on a Tuesday night. But I should be able to control that at enrolment time.

:)

Link to comment
https://www.sau.com.au/forums/topic/272219-sau-sa-club/#findComment-4623682
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...