Jump to content
SAU Community

Recommended Posts

Hey guys been talking to AP and he is wanting to do a cruise/photoshoot on friday.

We will meet at the new Carwash on the corner of Wells and Springvale Rd. Will have a chat for about an hour or so. Then we will head down all the way down beach road towards the Bolty Bridge. There we will be able to take a few nice piccies of all our beasts.

Westies also welcome if they want to make the trip.

Date: Friday 5th June

Where: Carwash Cnr Springvale and Wells Rd

Time: 8pm departing after 9pm

meet1.jpg

Hope to see you guys there,

LEANBAC n Krzysiu

Link to comment
https://www.sau.com.au/forums/topic/272423-photoshoot-beasts-from-the-east/
Share on other sites

  • Replies 110
  • Created
  • Last Reply

Top Posters In This Topic

mah man!!!

does anyone have some flood lights? that we could use on the night... but i dont think there is a power point

my car has got one :)

only problem is, long weekend, and im heading off to Warrnambool :iluvff:

DAMN IT ! cant ditch the women for a photo shoot, i'll get torn apart !

i could come down, bolty bridge, should be able to jump on the M1 from there and make my 3hour trip.

i'll discuss with the women.

im only going if Emsta goes. just cause your known to pull out last second, and if you dont come, i dont come, no flood lights ( btw i havent got flood lights just the power) :)

haha nah man.....just htat its time i started going to meets and photoshoots with all yer fools!

just find a girl who loves skylines.. seriously, kill 2 birds with 1 stone. she's happy and your happy! now she can sit in the car and STFU while you all take pics

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...