Jump to content
SAU Community

Recommended Posts

Yesterday I bought a car. The seller and I agreed on the price and settled it. However, I was unaware the the sale did not include the RWC, as his carsales ad stated. Which messed up our entire negotiation.

We discussed and came to the conclusion we'd get it checked out and see what the RWC would cost and sort it out from there.

He just sent me a message claiming he cannot get the RWC as it is too much hassle, and does not feel he should even need to get it checked out considering the low price we agreed on.

My question is, should I take the car anyway at its bargain price, and sort the RWC out myself, or lose the deposit and run.

From what I do know (we examined the car as we discussed the RWC):

- Tyres are near new.

- Windscreen is fine.

- All lights work, indicators etc.

I'm leaning towards sorting it out myself as the big killers (windscreen and tyres) are fine, but what other issues might I have to deal with? I'm just afraid of accepting the deal as it was and getting burnt with a hugely expensive RWC.

To clarify, what I'm asking is a list of possible problems the RWC might encounter and their cost to fix. Sorry if I'm asking a lot but I'm under a time constraint too.

Thanks guys.

Edited by KezR33
Link to comment
https://www.sau.com.au/forums/topic/272560-need-help-with-rwc/
Share on other sites

from experience, most garage will inspect on rotor thickness & pads, and that is the one that people often miss and didn't check.

worn rubber on brake & clutch pedals

worn / leaking shocks

modified / rusted / leaking exhaust

if the seller says getting rwc checked is too hassle for him, that kind of sounding a big alarm bell. probably he's tried done it before and something's very wrong that he knows it'll be a big hassle.

from experience, most garage will inspect on rotor thickness & pads, and that is the one that people often miss and didn't check.

worn rubber on brake & clutch pedals

worn / leaking shocks

modified / rusted / leaking exhaust

if the seller says getting rwc checked is too hassle for him, that kind of sounding a big alarm bell. probably he's tried done it before and something's very wrong that he knows it'll be a big hassle.

That's what I was concerned about.

So what's the worst outcome? $1000 for rotor pads and shocks? Will it be more?

If a cars in good nick you have nothing to worry about for an RWC only reason I can see he'd be so hesitant is he knows the mechanic is going to find something so he's pushing for a quick sale, I was going to buy a car for cheap and a guy was pushing for a quick sale as well. By suspicion got the best of me and I got it checked out by StateRoads set me back $260 but saved me from a HUGE investment the inspector said the car was so bad he refused to drive it to test it, it's been in multiple crashes and not one panel of the body work had the same paint depth (it's be resprayed many many times) It's a post here somewhere if you haven't seen it yet

That's what I was concerned about.

So what's the worst outcome? $1000 for rotor pads and shocks? Will it be more?

That would get you standard kyb shocks and rda slotted rotors with good pads im pretty sure, check the group buy section.

And if you are willing to share the info, a lot comes down to just how cheap you got it for.

if possible id try and get a check done on it before you buy it just so you know what your in for.

as stated above State Roads do a very thorough check on a car compared to say an racv check.

i do roadworthy checks at my work and we check things from...rotor thickness, pads, tyres, shocks, screen, seatbelts, dash controls, check for jig marks and evidence of accident...even if the oil is low just to name a few.

as said if the guy says its to much hassle to get a roady done on it then id be careful.

Edited by kizzza

I like this stateroads idea.

Gonna cost a shitload though. Website says $500, or $500 warrenty? I don't understand it.

Well, even $260 + $200 deposit is going going to hurt if the results come back poorly, but better that than losing the entire $11,000.

For reference I'm looking at '93 N/A Auto Supra with 150ks. Has a bunch of other minor mods too like exhaust, alarm, stereo, rims etc.

id seriously take it to get a roady and say if it passes ill buy it (or if its close to passing) but if its f**ked you can keep it (and try and get your deposit back)

good idea. he shouldn't have a problem with you sussing out what it needs for RWC before you buy.

can't say i'd buy a car with no idea what it needed in the way of repairs etc.

hope it all works out mate

We came to an agreement.

He must at least get a quote from a mechanic licensed to deliver RWCs on what the RWC will cost. If it is less than $500 I'll agree to the original price, if its more we'll have to renegotiate or I'll back out.

I'm gonna call up the mechanic before I buy though and confirm with him that if I bring the car in they'll agree to do the RWC for the quoted price.

Thanks for the help guys.

Got lucky.

One of the front shocks was leaking, and the mechanic would not pass it until it was fixed. However, you cannot use second hand shocks, and you cannot use aftermarket parts. It has to be a new and original part from Japan. Which costs a small sum of money and takes 5 weeks to get here!

It also gave me a pretty good excuse to bail out on the deal as the more I thought about the car the less I liked it. Little things were bothering me, like the wear and tear on the interior not matching odometer.

It had some wonderful things, like a beautiful custom paint job (not a cheap job, and nothing overly bright or flashy) - which is what I fell in love with in the first place, but everything else was annoying me too much.

you cannot use second hand shocks, and you cannot use aftermarket parts. It has to be a new and original part from Japan.

who told you that? :P so if you had brand spanking new coilovers it wouldn't pass? that doesn't sound right

However, you cannot use second hand shocks, and you cannot use aftermarket parts.
who told you that? :P so if you had brand spanking new coilovers it wouldn't pass? that doesn't sound right

Bullshit, i was worried about that when i had to clear a canary on my car, my guy told me that there not illegal, all who looks for is that the suspension has enough travel.

Also why cant you use second hand, as long as it no leaking and working correctly there is no problem, also kyb and i think monroe make a standard replacement shock.

You need to stop using that mechanic, he is a tool.

who told you that? :P so if you had brand spanking new coilovers it wouldn't pass? that doesn't sound right

The mechanic who did the testing.

I thought it was a bit suss too, but honestly I have dealt with enough shit for this car I didn't even care to chase it up. I hadn't even bought the thing and it was giving me the shits.

For the other guy who asked; it was a Toyota Supra.

Actually, I think you're right.

I didn't speak to the mechanic directly, this is just what the seller relayed to me.

I asked for the mechanic's number so I could contact him directly and sort something out, but he never got back to me, and since I'm not particularly interested in the car anymore I didn't hassle him either.

My guess is he was upset with the low price we agreed on (I always knew he didn't like it, I'm pretty sure it was the wife who pressured him into taking it), and was looking for a way out.

So hopefully that's a bullet dodged.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
×
×
  • Create New...