Jump to content
SAU Community

Recommended Posts

im due for a 100k service now ive been quoted 850 buks supplied and installed the kits contains pretty much the same shit as the kudos 100k service kit so now my question do i have to get everything for my 100k service cos i could save a shit load of money just getting timing belt n water pump but want to know if not getting the other parts can be dangerous or risky

also if you have had ur 100k service done were did u get it done n how much did it cost

and one last question if u know any sweet hook ups that can do it for me cheaper than most mechanics that would help alote

Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/
Share on other sites

she did mine too. those false teeth really help.

srsly though, i should probably do my 100k soon. wonder if the fact that the sr runs a chain will effect the price...

Edited by scandyflick
Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4629612
Share on other sites

hate to be the nazi here, but this has been covered approximately 14.5 million times. search button.

heres a fairly recent thread.

+1

Check the sticky section next time :thumbsup:

http://www.skylinesaustralia.com/forums/Wo...st-t123887.html

Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4629654
Share on other sites

depending on where you are..down south..GTEK 83261711 are good....i trust them with my cars.my wifes falcon is in there at the moment..and its sharing the shed with a rb20 r32...a supercharged injected ke30....a HZ panelvan...and a 355 chev ke15 coroola

Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4630771
Share on other sites

I havnt done mine yet... EEEP. I have just been doing the regulars at Morpowa.

I changed the timing belt as soon as I bought it though, just cos you never know with KMS.

Havnt changed my waterpump, belts are fine... not sure about the Ider bearings.

Probably would benifit with new spark plugs.

I cant afford a major service right now... thinking I might do them ad hoc.

Am I risking anything major by dont doing it right now?... I knew the timing belt was so thats why that was done.

Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4630916
Share on other sites

I havnt done mine yet... EEEP. I have just been doing the regulars at Morpowa.

I changed the timing belt as soon as I bought it though, just cos you never know with KMS.

Havnt changed my waterpump, belts are fine... not sure about the Ider bearings.

Probably would benifit with new spark plugs.

I cant afford a major service right now... thinking I might do them ad hoc.

Am I risking anything major by dont doing it right now?... I knew the timing belt was so thats why that was done.

The timing belt is the biggie Penny, so you've done good.

Should prob change your oil, oil filter, coolant and plugs. While you're at it, check the waterpump for any 'rattle' or leaks. Maybe do that also anyway!

If your bogan BF won't touch your Skyline to help you with, I'm sure there's many lads who would help.

Give me a holler if you need help.

:(

My Stag has only done 60K, but I'm already accumulating new pump, belts etc.

Might even do a quick oil change and plug change before Kadina this weekend.

Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4631015
Share on other sites

The timing belt is the biggie Penny, so you've done good.

Should prob change your oil, oil filter, coolant and plugs. While you're at it, check the waterpump for any 'rattle' or leaks. Maybe do that also anyway!

If your bogan BF won't touch your Skyline to help you with, I'm sure there's many lads who would help.

Give me a holler if you need help.

:(

My Stag has only done 60K, but I'm already accumulating new pump, belts etc.

Might even do a quick oil change and plug change before Kadina this weekend.

Cheers,

Yeah I change the oil and oil filters regulary, its had about 3 complete coolant changes due to my overheating issues and several radiators I went through. Haha

I am more skilled with cars then the BF, I was the one inspecting the cars he looked at! haha

I cant do the plugs on the skyline tho... I can on really old cars but not on this.

I havent seen any leaks or anything but ill double check this weekend.

Is it hard to change gearbox oil?

My dad was a mechanic back in the day but doesnt know the ins and outs of imports like this forum, and hes always to busy to help with it anyway. My partners dad is also a mechanic, not very handy when he lives in Port Lincoln!

I enjoy working on cars, I need a bit of instruction but I do like it.

Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4631168
Share on other sites

Cheers,

Yeah I change the oil and oil filters regulary, its had about 3 complete coolant changes due to my overheating issues and several radiators I went through. Haha

I am more skilled with cars then the BF, I was the one inspecting the cars he looked at! haha

I cant do the plugs on the skyline tho... I can on really old cars but not on this.

I havent seen any leaks or anything but ill double check this weekend.

Is it hard to change gearbox oil?

My dad was a mechanic back in the day but doesnt know the ins and outs of imports like this forum, and hes always to busy to help with it anyway. My partners dad is also a mechanic, not very handy when he lives in Port Lincoln!

I enjoy working on cars, I need a bit of instruction but I do like it.

Plugs are easy for those who have done it already. Sing out if you need help. After Kadina, I can assist if no one else can.

I take it your 34 is manual? This isn't too hard either as long as you can get the car off the ground enough. HAven't done one in a while, but there's normally two bolts (one for draining, another for filling).

Get ya GT-T and we'll have you swapping turbos in no time :banana:

Edited by RubyRS4
Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4631609
Share on other sites

she did mine too. those false teeth really help.

srsly though, i should probably do my 100k soon. wonder if the fact that the sr runs a chain will effect the price...

The timing chain isn't part of the 100k service. I'm pretty sure that the scheduled service for the chain is 200k

Link to comment
https://www.sau.com.au/forums/topic/272706-100k-service/#findComment-4631633
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...