Jump to content
SAU Community

Recommended Posts

  • Replies 182
  • Created
  • Last Reply

Top Posters In This Topic

Sorry Andrew -1 on this....will be able to lend you my current standard in a couple of weeks though if you still need it.

Hey mate,

Not a problem, would we be able to make up something similar to the image above off the standard shape/size?? otherwise i'll probably just use my car to make it up.

Hey mate,

Not a problem, would we be able to make up something similar to the image above off the standard shape/size?? otherwise i'll probably just use my car to make it up.

I just purchased the one as per your image.

I'll get some photos of current work, he does lots of high end fabrication tho, you look in just about every high performance mag and you will find their work :D

i was thinkin of getting something done similar to the dolphin job? but i'm open to the best suggestion!! is the stock dump the same size as the dolphin job??

post-31456-1243930499_thumb.jpg

Flange looks tricky to source but i will pop into a shop tomorrow to see if they can get it. otherwise i will get a gasket and we will lazer cut a flange from it.

any coatings can be done also. prob best to get em ceramic coated or the like.

Dolphin dump is a different design again (much straighter)

DolphinDumpPipe.jpg

If you are designing one, try to get it is straight as possible.

Yes the OE dump as a small cat on it. Are you able to get a cat to fit on a 3 or 2.75" dump and fit it in that space?

If so, I would be very interested as I need a cat-fitted dump pipe on mine.

Ok i have the flange, will have to get some more made this isnt the neatest.

i'll be needing a stock dump, or something soon so if anyone has that would be great. otherwise my cars off the road and dump will get pulled out..

we're open to designs on which would be best option for all. i'd rather have it like the first design, and a cat under the car in between dump and front pipe.

3inch i guess everyone is after?

If anyone is interested in a split dump pipe.

liverpool exhaust have a mild steel ceramic coated one made up.. soon to be on the market.

i'm not going to make up a split dump tho since the exhaust housing isnt split too well and i simply dont like the idea anymore. would rather have a complete 3inch all the way.

Ok i have the flange, will have to get some more made this isnt the neatest.

i'll be needing a stock dump, or something soon so if anyone has that would be great. otherwise my cars off the road and dump will get pulled out..

we're open to designs on which would be best option for all. i'd rather have it like the first design, and a cat under the car in between dump and front pipe.

3inch i guess everyone is after?

Cat after dump is not good for me personally.

I have the de-cat Kakimoto 80mm front pipe that bolts straight up to the OE dump (and to my Legalis exhaust) so I guess I will be sticking with the OE dump.

Ok, will see what the majority wants really. but it may not be a problem to modify what you want done. will obviously cost more since there is a Pussy involved..

Understandable.

Let me know if there are any options for a cat to be added to the dump. If not, no stress.

Gotta have at least one cat as I don't want all that carbon sh!t on my rear bumper.

Edited by iamhe77
Understandable.

Let me know if there are any options for a cat to be added to the dump. If not, no stress.

Gotta have at least one cat as I don't want all that carbon sh!t on my rear bumper.

Pussy and cars dont mix :D

if the dump we make is long enough to house a cat i dont see a problem.. just clearance may be an issue, and it will be welded on permanent i'd say/

will try get stuck into this this arvo when i finish work

Pussy and cars dont mix :D

if the dump we make is long enough to house a cat i dont see a problem.. just clearance may be an issue, and it will be welded on permanent i'd say/

will try get stuck into this this arvo when i finish work

What do you want a cat for anyway? :) Will talk to you on Sunday about the possibility about lending it....will be about two weeks till I get it though.

cheers

Craig

What do you want a cat for anyway? :) Will talk to you on Sunday about the possibility about lending it....will be about two weeks till I get it though.

cheers

Craig

Hey mate, sounds good.

yeah i dont like cats at all, like trying to breathe thru a pillow :D

i'll either be pulling mine apart tonite to get the standard dump off to make a jig out of or borrowing one. the standard dump will be fine..

so chances i may not even need to borrow it..

thanks anyhoo :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...