Jump to content
SAU Community

Recommended Posts

Regrettably, the time has come to sell my pride and joy in order to move on to bigger and better things in life. I'm the first and only owner of the car, since having it personally imported for me, through J-Spec. It was purchased in 100% stock condition right down to the factory exhaust and wheels. Every modification and all of the work done has been done here by RE customs.

The car has been serviced every 3 months/5000km's whichever came first, by RE customs, using top of the line Motul oils in the engine, gearbox and diff.

There is currently 123,000kms on the clock, with 28,000km's on the turbo and engine since the rebuild.

1998 Series 2, 40th anniversary edition

Engine

-Rebuilt RB25DET

-Arias forged pistons

-ACL race bearings (big end and main)

-Reconditioned head

-Gates Racing timing belt

-HKS GT-RS (purchased brand new from Nengun at the time of the rebuild)

-S15 440cc injectors (only been in a few thousand kms)

-Z32 AFM

-Splitfire coilpacks

-Bosh 023 fuel pump

-SARD fuel pressure reg.

-3" turbo back exhaust consisting of Xforce stainless steel bellmouth front/dump, Catco highflow cat and Xforce mild steel catback

Last dyno run made 253rwkw on 18psi

Cooling

-Blitz LM turn flow front mount (no holes in chassis, stock piping retained)

-Trust 13 row oil cooler kit

Suspension and handling

-Sydney Kid GB Bilstein shocks with Whiteline springs

-Front and rear Whiteline fixed sway bars

-Front and rear Whiteline camber and castor kits

-Whiteline rear subframe alignment kit (pineapples)

-HICAS lock bar

All suspension fitted by Centreline suspension in Thomastown

-Cusco front strut brace, Nissan rear strut brace

-Volk 18x8.5 18x9.5 +22 bronze TE37's in perfect condition

-Hankook K107's, 235 front 265 rear

-Rays Duraluminum lightweight locknut set

Braking

-RDA grooved and dimpled rotors front and rear

-QFM A1RM pads front and rear

-Rebuilt calipers front and rear

-ADR approved braided brake lines

-Brake cylinder stopper

Electronics

-Power FC with hand controller

-Blitz SBC Spec-R EBC

Interior

-Rare factory option MOMO steering wheel

-Autometer Cobalt series gauges (boost/oil pressure mounted on pillar, oil temp mounted in DIN slot)

-Genuine series 2 floor mats (not the ugly white speckled ones seen in most 33's)

-1kg CAMS approved fire extinguisher

-Pioneer DEH-8650 MP3 headunit

-Alpine DDD 6" splits front, 6" rears

-Amec black 300km/h cluster

-Blue L.E.D cluster lighting

-Nismo leather gear knob

-Apex-i turbo timer

-RAZO pedals

-Insurance approved black wire alarm system/immobiliser etc

Exterior

-Type-M body kit with factory fitted genuine adjustable GTR wing

-Tinted windows

-Nismo smoked side indicators

The plenum and all visible piping, as well as the intercooler, brake callipers and hubs have all been powder coated black.

I have receipts for pretty much all parts and work carried out as well. All parts have been purchased brand new and quality Jap brand name parts have been used in lieu of cheap Chinese imitations.

Price: $21,000 ono

I'm willing to sell without the TE's (stock rims will be provided) for a lowered price.

PB300014.jpg

post-a194518-23.jpg

post-a194517-22.jpg

n630251291_1453950_4461.jpg

IMG_5199.jpg

Link to comment
https://www.sau.com.au/forums/topic/274145-1998-series-2-r33-gts-t/
Share on other sites

I endorse this product and or service.

Was in mint condition when we imported it for Dezz, was the last of the R33 GTSt's and had all the factory goodies that Nissan could throw in it being a special edition. all mods done in oz from scratch, and its still mint.

GL with sale.

This is the best R33 gtst for sale i have ever seen, has everything i'd want for it and been rebuilt.

Thanks for the comments, usually comments like that only come from the sellers mates but pretty sure I don't know you lol

Listen to what he has said.

If the buyer doesn't want the rims, then he will sell them.

Yeah pretty simple really..

Also forgot to mention, rocker covers and timing cover have been professionally painted in Cusco blue.

Apex-i panel filter always used in the stock airbox

In a few of the pics it looks like theres gtr or aftermarket seats in it, something else you forgot to mention? lol

Edited by Joe_89

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...