Jump to content
SAU Community

Recommended Posts

Pedders use White line components just painted red and badged as there own ...

I have Pedders sports rider suspension with pedders lowered springs in my R32

Monroe supply Pedders wiht shocks and Pedders make their own springs

I also have a full nolathane bush kit throughout the car

Redranger own Nolathane, Noltec and Whiteline and they also supply Pedders their home brand bushes

Have a Pedders larger rear sway bar upgrade aswell

Depending on how long ago you bought it, I probably made it.

I can vouch for there suspension this isn't the first one of my cars which has there gear either they are pretty damn stiff depends on the spring rate of springs that you buy aswell..

Some kits are OK, some aren't

White line regularly test out there suspension products at Wakefield park and have good R&D and they are Australian made

Bushes are made in Korea, Whiteline springs are discontinued they were local, alignment kits are made locally and in Korea, high volume swaybars are made in Korea, low volume and specials made locally by Selbys Swaybars

As for there service in store I am also with you guys that they are not the best bunch to deal with and tend to rip you a new one when ever you get things done.

It varies greatly from store to store and how much you know to question them.

Good thing being in the trade is trade discounts and only buy parts from them don't get them to do your work.

Just be careful about which products you buy, some are OK, most in fact, but Monroe shocks in a Skyline, I don't think so.

As for alignments in Canberra there are only 2 shops that I recommend Inline suspension in Queanbeyan and Capital steering and suspension in fyshwick

Agree

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4667810
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

From my 2 experience with different Pedders stores in Brisbane, I would have to say "Hell no, run away or wait for Fulcrum at the very least". Last time I went to Pedders they stole/lost my fuse box lid and denied it was ever there. Plus they replaced bit that might have been broken but didn't fix the bush that was totally stuffed.

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4673019
Share on other sites

I took one of my VN's years ago to a pedders just for a wheel alignment.The fools wrote me out a quote for almost a grand quoting to replace, everything from steering rack right through to springs just about. Told em see ya...I would recommend Eastcoast suspensions in kirrawee.Very happy with their work.No Bullshitting to me, straight upfront and at a fair price too

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4673045
Share on other sites

Interesting thread - there's a Pedders here, and that would be the only local suspension shop left (Used to have a guy who specialised in wheel alignments and putting in suspensions, not sales, but unfortuantely he left to go up to the mines). I'm tossing up whether to take my car there or to my local mechanic for a wheel alignment and a general look over of all the suspension components, as I've been VERY disappointed with the job done at local tyre places on my previous car.

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4675990
Share on other sites

hr33gts - cheers for the advice

but i only just read it and i've returned from a quick visit to John UAS and i've now got my itemised quote of goodies to save for.

it seems like it's going to be a bilstein purchase, springs TBA.

the last 33 had them on (UAS again) and all was well so looking forward to getting ém again :P

you are on the right track. I know john very well and sure he's an old fuddy duddy, but he actually races his car and has lots of customers with quick cars of all types including many GTSTs and GTRs. he is smart enough to pay attention to what works and what doesn't and knows the reasons why. and has tried and tested lots of different combinations on his and on customers cars. plus he talks to me so he can't be too dumb. lol. he is also not in love with any one brand of gear and will source whatever is suitable for the CUSTOMER. not just flog whatever shit he gets the cheapest. sure it's a mission from ACT but it's not like you'll have to make the trip a dozen times. so I say if you're happy there, then just go ahead and get UAS to do it. :D

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4676042
Share on other sites

I went to pedders to get my new rose jointed tie rod ends installed they came out 10 minutes into the job and said it didn't fit, + showing me that it doesn't, got really pissed off at just jap so made a few angry calls, one the way to kirrawee to replace them noticed there was some dried paint inside... Got to them they noticed the same, they cleaned it out and I went back to pedders furious at them, told them it was just a bit of paint and it just needed scraping/ thread chaser, anyway $88 to replace both sides.

But yeah if they couldn't do a simple thing like that I doubt I would go there again, wasted my time and petrol

Edited by DaGr81
Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4676319
Share on other sites

From my 2 experience with different Pedders stores in Brisbane, I would have to say "Hell no, run away or wait for Fulcrum at the very least". Last time I went to Pedders they stole/lost my fuse box lid and denied it was ever there. Plus they replaced bit that might have been broken but didn't fix the bush that was totally stuffed.
I took one of my VN's years ago to a pedders just for a wheel alignment.The fools wrote me out a quote for almost a grand quoting to replace, everything from steering rack right through to springs just about. Told em see ya...I would recommend Eastcoast suspensions in kirrawee.Very happy with their work.No Bullshitting to me, straight upfront and at a fair price too
I went to pedders to get my new rose jointed tie rod ends installed they came out 10 minutes into the job and said it didn't fit, + showing me that it doesn't, got really pissed off at just jap so made a few angry calls, one the way to kirrawee to replace them noticed there was some dried paint inside... Got to them they noticed the same, they cleaned it out and I went back to pedders furious at them, told them it was just a bit of paint and it just needed scraping/ thread chaser, anyway $88 to replace both sides.

But yeah if they couldn't do a simple thing like that I doubt I would go there again, wasted my time and petrol

How does experience with labour from a franchise have to do with anything in regards to the actual PEDDERS product?

Products are made elsewhere and supplied to each franchise to be installed onto the car...

Thanks Sydneykid for an explanation of Pedders products, good to know where they come from :)

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4676766
Share on other sites

I went to pedders to get my new rose jointed tie rod ends installed they came out 10 minutes into the job and said it didn't fit, + showing me that it doesn't, got really pissed off at just jap so made a few angry calls, one the way to kirrawee to replace them noticed there was some dried paint inside... Got to them they noticed the same, they cleaned it out and I went back to pedders furious at them, told them it was just a bit of paint and it just needed scraping/ thread chaser, anyway $88 to replace both sides.

But yeah if they couldn't do a simple thing like that I doubt I would go there again, wasted my time and petrol

This is why you Zinc chromate or anodise your threaded parts, not Powder coat them. JJR should know this.

All of my range of suspension arms are Zinced for this reason

Pedders use White line components just painted red and badged as there own ...

I have Pedders sports rider suspension with pedders lowered springs in my R32

Monroe supply Pedders wiht shocks and Pedders make their own springs

I also have a full nolathane bush kit throughout the car

Redranger own Nolathane, Noltec and Whiteline and they also supply Pedders their home brand bushes

Have a Pedders larger rear sway bar upgrade aswell

Depending on how long ago you bought it, I probably made it.

I can vouch for there suspension this isn't the first one of my cars which has there gear either they are pretty damn stiff depends on the spring rate of springs that you buy aswell..

Some kits are OK, some aren't

White line regularly test out there suspension products at Wakefield park and have good R&D and they are Australian made

Bushes are made in Korea, Whiteline springs are discontinued they were local, alignment kits are made locally and in Korea, high volume swaybars are made in Korea, low volume and specials made locally by Selbys Swaybars

As for there service in store I am also with you guys that they are not the best bunch to deal with and tend to rip you a new one when ever you get things done.

It varies greatly from store to store and how much you know to question them.

Good thing being in the trade is trade discounts and only buy parts from them don't get them to do your work.

Just be careful about which products you buy, some are OK, most in fact, but Monroe shocks in a Skyline, I don't think so.

As for alignments in Canberra there are only 2 shops that I recommend Inline suspension in Queanbeyan and Capital steering and suspension in fyshwick

Agree

Some good inside detials here, put them in your notebooks people.

As for thier coilovers, It is said that the Xa range is just D2, but Im not convinced. I think they are MDU by the looks of them, but obviously without pulling them apart its hard to say.

Either way, you can really expect this to be a great damper as they only cost $1500 per set (same as ISC :S)

You can expect them to last too long.

At least they use steel lower sleeves, thank god

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4678405
Share on other sites

I personaly dont mind the store in dandenong if your in the SE subs, i had an alignment there after a nasty gutter hugging session, they said, "we couldnt do a full alignment for everything, but we did our best, and we wont charge you the full amount" i said buety, that was about 5 months ago and i havnt had a trouble with my alignment.

I plan to go there to get my ball join boots done, also i was talking to them about their coilover setup they have going, apparently theyve sold a quite a few to trackers and street guys and they have good raps.

The store in dandenong i actualy got recomended to from here, and there all older guys, no young guns like the rest of the places.

But thats me.

I've had heaps of work done at Pedders Dandenong and i can't recommend them more.

The owner (old bugger) is a champion, talks through everything and is extremly thorough.

I've got their Extreme coilovers installed and they've been bloody fantastic.

It all just depends on which one you go to.

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4678833
Share on other sites

Was in a reputable workshop in Yarraville Vic this week that deals mostly with "race brakes" and I saw a 550 marenello up on a hoist sporting a brand new set of coilovers. Pedders coilovers to be precise.

The owner had binned something much more exotic for the pedders gear. Either he knows something we dont or he has lost his marbles.

Nice! Makes me feel even better about having their coilovers too!

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4678835
Share on other sites

Pedders Sports Ryder eXtreme XA Adjustable Coil Overs.

Anyone heard of these? If so any good ?

Yes I have these on mine (purchased from previous owner) and they seem fine. First car I've had with coil overs so I can't really compare. As for their service, I have only been once to get a wheel alignment, other than the price ($110, I think?) they seemed fine. Slowed down the wear on the inner-rear tires.

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4687470
Share on other sites

i think it all comes down to the store and also how you get on the with the guys that work there...

i am currently a customer of pedders mascot and so am pretty happy with their service. sure it could be better but you cant be 'mates' with everyone and expect everything for free! (or discounted for that matter)

i have been there 3 times now:

first for a wheel alignment and 28point check...

2nd time to install a heap of JJR arms and wheel alignment,

and thrird just now for some whiteline saybars, spanner check and wheel alignment.

now they are not the cheapest but i have built up some repour with the guys and they know what im talking about so i think they veiw me with some respect and hence do a good job and explain things.

they would get so many schmucks going there and would be sick of all the fully sik kids say this and that and blah balh blah...they probably get kicks out of all the bullshit they spin...even though their slogan is 'no bull'

like anyone, if you give them the respect to begin with and actually have some detailed conversations fisrt, you'll probably get the service you want. otherwise you are just anyother customer that doesnt know what they are talking about.

any after some conversation you'll also quickly learn how good a store they are...

i wouldnt think of them as a chain, they are a franchise so will differ greatly from store to store just every other mechanic...

i have still yet to find anyone that is as fastidious as i am anyway and probably never will...so you just have to learn to deal with it or do it yourself. there are jsut some tasks i dont have the time for or the facilities... and i even have my own factory!

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4687875
Share on other sites

How does experience with labour from a franchise have to do with anything in regards to the actual PEDDERS product?

Products are made elsewhere and supplied to each franchise to be installed onto the car...

Thanks Sydneykid for an explanation of Pedders products, good to know where they come from :(

Service is at least half of any such businesses "product". Simple.

If they don't have the training capacity or HR tools to employ quality people then the business is a poor one. If they can't ensure a remotely similar level of service between their stores then why would I assume their product quality would be any better?

As yet I know nothing of the quality of their parts.

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4701559
Share on other sites

Then again I've very rarely had a car touched by any mechanic and not had at least some part of the experience be an issue. Last month got new rack ends , a few weeks later the boot falls off, obviously not put on properly.

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4701565
Share on other sites

  • 2 weeks later...

Well i own a 32gtst and its sits nicely on 18'S with Extreme Xa pedders coilovers I love the way it Handles/Drifts no matter if i have a full tank of fuel with a full car and my big fat sub box in the boot it still drives so nice i wouldnt let many people mess round with my car but i would gladly hand my keys over to Dave for days on end Pedders deals with my car i dont take it to any mechanic i service it myself but i would highly recommend PEDDERS HORNSBY speak to Dave he knows his stuff

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4725828
Share on other sites

  • 1 month later...

Thank you DAS KAMU, thank you very much.

Al and his boy's at pedders in Brown's Plains did a bang up job on my 96 33 GT. They installed all the whiteline stuff (nightshift sleepy) and a set of Extreme XA coilover's. Very professional outfit, friendly, right price and they are more then happy to show you what parts are stuffed so you know your not getting ripped off. My car drives and handles 200% better then what it was before.

I would recommend these boys to anyone who is thinking of doing some suspension upgrades.

From now on Pedder's will be my suspension specialist's. :P:(

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4820702
Share on other sites

it does seem to be a bit of a franchise thing, and personal experience, as from reading this thead, it seems some people are getting a raw deal from one shop, and others going to the same place and finding it bliss.

i went down to my local pedders and got some of there sports Ryder springs (well i will tomorrow, i ordered them :)) the owner was saying that he doenst like selling them, as they are illegally low (his preferance i guess, as it is his store), and that generally the springs that they make are about 20% stiffer than standard springs.

You have to remember that because its a franchise, that each store is very much independent, they just have the same stockists. so comparing service and a generality would be a mistake.

- it would be cool to have a thread comparing experiences with the pedder products.

so are there springs red whiteline springs? or actual pedders springs?

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4823679
Share on other sites

Thank you DAS KAMU, thank you very much.

Al and his boy's at pedders in Brown's Plains did a bang up job on my 96 33 GT. They installed all the whiteline stuff (nightshift sleepy) and a set of Extreme XA coilover's. Very professional outfit, friendly, right price and they are more then happy to show you what parts are stuffed so you know your not getting ripped off. My car drives and handles 200% better then what it was before.

I would recommend these boys to anyone who is thinking of doing some suspension upgrades.

From now on Pedder's will be my suspension specialist's. :):(

no worries glad i could help

ill never go anywhere else :)

Link to comment
https://www.sau.com.au/forums/topic/274952-pedders/page/2/#findComment-4823781
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I'm guessing you mean something like this size? https://www.supercheapauto.com.au/p/bodyworx-bodyworx-hard-soft-sanding-block---70-x-135mm/594184.html?cgid=SCA01100303#srsltid=AfmBOoq_qZTEe3boann9BaHiB2f59dxJlosWLzCr0zm_weHgUlDX-N5f&start=6 Are they sanded completely flat?
    • Just a standard sanding block size. With the rock chipa they are quite small. I sanded them as you could feel the edges. 
    • Say you've just laid all your filler and your about to start sanding, how large is the sanding block your using?  Like a high fill primer? Technically possible but would be a nightmare. Just guessing from the photo, but they look small enough that you might get away with using a 1k spot putty. Normally you'd use something like this on pinholes but with the type of project you're working on I'd give it a go. 
    • Omg Brake pedal removal.. FML!!
    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
×
×
  • Create New...