Jump to content
SAU Community

R33 Rb25de Non Turbo Hks Super Drager Catback Exhaust

OoskylineoO
 Share

Recommended Posts

OoskylineoO Experienced

OoskylineoO

Posted
Posted (edited)

Item : HKS Super Drager Cat Back Exhaust system RB25DE

Specs : 2.5'' Mandrel Bent, comprised of a mini muffler type silencer followed by a small hotdog and baffled muffler

Condition : Excellent condition ! , has NO kinds of dents or holes whatsoever apart from extremely minor scrapes,

Was on my NA r33 gts4, never had to do any of that angling stuff to get over speed humps indicating my car was either very close or if not stock height.

Reason : Turboing the gts4 and upgrading to larger exhaust system.

Personally i think it was the best NA exhaust I've had, specially designed by HKS for the NA RB25DE, DOES NOT DRONE whatsoever like what i got from cannons and won't give you a throbbing headache from long/highway drives/cruises, on idle its close to stock and when giving it a bit gives off a very good tone, its loud when it wants to be.

Power wise, the exhaust might look restrictive but the car actually felt more responsive. This together with coby extractors and a high flow cat set up, i was able to pull mid-high 14s at WSID.

Price : $600ONO this is an extremely rare and genuine item from HKS, I even have the booklet/manual :S that came with it, if you can read japanese then it'll tell you how good it is lol. I prefer keeping the exhaust then letting it go too cheaply. Was worth $1400 brand new.

PM if interested :D

PS. I'm also planning on selling my set of Coby D12 Extractors soon.

post-40593-1245320188_thumb.jpg

Edited by OoskylineoO
Victory Mentor

Victory

Posted
Posted

Would this fit on a R32?

We are building a R32 with a R33 RB25de and are looking for a system like this. Whould it just mean taking a few inches out of the front section to fit the shorter R32 floor pan?

bert_ Rising Star

bert_

Posted
Posted

it should fit with some modification, but dont quote me. this is a very good exhaust for a n/a set up. they're pretty expensive when you buy them brand new. for me personally i think its very cheap for the condition its in.

OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted (edited)

it won't be a direct bolt on obviously but yes i think you will have to do some modifications to it in order for it to sit in correctly.

My contact number is 0434282321 SMS me if you have any questions

Edited by OoskylineoO
  • 3 weeks later...
nafan Enthusiast

nafan

Posted
Posted

hello there iam interested in your exhaust system but iam in victoria. would you be able to post in down here iam will to pay for it to get down here. get me back asap

OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted

CURRENTLY HELD OFF SALE AT THE MOMENT

GOING TO HAVE TO HOLD ONTO THE EXHAUST FOR A FEW MORE WEEKS, MECHANIC IS BUSY AND HAS RESCHEDULED MY ENGINE CONVERSION SOMETIME NEAR THE END OF AUGUST :P !!

BUT UNDOUBTINGLEY WILL BE BACK UP FOR SALE ONCE MY CAR GOES IN, SORRY IF I HAVE WASTED ANYONE'S TIME.

  • 1 month later...
OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. $1000ono

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

N/A polished Induction/Intake pipe, in excellent condition gives a nice low end induction growl. Came off R33 rb25de $150ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...