Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

It's called 'dosing' in the VL world, also know as 'flutters', but around here it's best described as 'compressor surge'.

It's the sound of the air bouncing off the turbine blades when the butterfly to the intake plenum is closed. Normally all this pressurised air get's released by the Blow Off Valve, but if you don't have one, it does that.

Different length, shape and designs of pipes make different noises...

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4673870
Share on other sites

It's either a HKS Super Sequential BOV or some cheap ass BOV or like what others have said compressor surge.

HKS Super Sequential BOV = Wank (Only useful on highly tuned cars that are running a lot of boost and the stock one cannot handle it any more)

Compressor Surge = Say goodbye to your turbo.

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4673960
Share on other sites

It's either a HKS Super Sequential BOV or some cheap ass BOV or like what others have said compressor surge.

HKS Super Sequential BOV = Wank (Only useful on highly tuned cars that are running a lot of boost and the stock one cannot handle it any more)

Compressor Surge = Say goodbye to your turbo.

Is that the HKS SSQV BoV? I've been trying to convince a mate to buy one for his evo, but all the vids I've seen of it its a sharp, high pitched noise rather than the VL flutter.

Just curious, is "dosing" unique only to the VL, or is there a specific reason VL owners choose it?

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674172
Share on other sites

Is that the HKS SSQV BoV? I've been trying to convince a mate to buy one for his evo, but all the vids I've seen of it its a sharp, high pitched noise rather than the VL flutter.

Just curious, is "dosing" unique only to the VL, or is there a specific reason VL owners choose it?

Yeah either it's the HKS BOV or like others have said with the metal pipe.

Any turbo car can make the noise, it just depends on the BOV set up or whatever the owner does to it.

The stock BOV should not make any noise, at least no "Stu Tu Tu".

But if you put on an air pod, while still having your stock BOV, you will get a nice "Suction" noise then a "Choo" at the end (Only when on boost).

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674302
Share on other sites

What the hell is that noise? I've heard it twice now, both times from VLs. Is it some tricked out BoV?

If you ask me I think it sound ridiculous. My girlfriend was in hysterics for about 10min as we drove beside this thing.

Thanks.

LOL! just search "VL turbo dose" on youtube,,theres thousands of videos on that stuff,,apparently they're a favourite with wog guys and their significant others

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674330
Share on other sites

my ceffy doses like an athlete on the roids, but it comes from factory with no recirculation valve, and still runs stock boost on a stock turbo. all you have to do is take out the intake resonator and bolt in a pod and I get instant flutters.

GAGF if that's bad for the turbo, it came from factory like it and has run for 180,000 kms with no damage to the turbo or engine.

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674359
Share on other sites

Yeah either it's the HKS BOV or like others have said with the metal pipe.

Any turbo car can make the noise, it just depends on the BOV set up or whatever the owner does to it.

The stock BOV should not make any noise, at least no "Stu Tu Tu".

But if you put on an air pod, while still having your stock BOV, you will get a nice "Suction" noise then a "Choo" at the end (Only when on boost).

that is incorrect.

the only relation a BOV has to flutter/dosing is whther its blocked or not. the type of flutter/dose depends on the width, length and material of the induction pipe. the turbocharger does play a roll aswell.

all a bov does is hold the air trapped in the piping. so it bounces around and goes back through the turbo, for the turbo wheel fins to chop up and make a stuttered noise.

a SSQV HKS BOV has nothing to do with dosing....its just like any other BOV... but produces a whistle like sound when air goes through it. if you block it off, its the same as your OEM bov and every other blocked bov. does nothing special.

the Dose you hear on VLs sound like stupid dolphins or piegons as you heard.

they run a small metal pipe, no bov, and multiple bends to magnify thehigh pictched stuttered noise.

alot of the high powered veicles in japan and here automaticlly produce this sound as a side affect for high horsepower aplications but usally produce a much deeper tone due to larger turbos.

this is because piping is usally much larger due to larger turbocharges and dont run many bends.

although the title says HKS SSQV, its incorrect.

personally i hate the high pitched doses, which have been attached to wogs and VLs. but i am madly in love with the noise similar to the 650hp R34 GTR videoed above. would prefer it over a OEM "CHOO" or whistle anyday

my 2c

:P

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674583
Share on other sites

the vl boys cut a gap in there intercooler piping to put there afm so that there is no restriction between pod and turbo.

using diffrent lengths and angles of piping gives diffrent pitch noises.

alot of the guys that i went drifting with on the track a while ago had it, sounds sick when your using your accelerator to control the slide.

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674589
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...