Jump to content
SAU Community

Recommended Posts

AVCR is the worst ever..

I use a GiZZMO MS IBC which I picked up brand new for $300.. works perfect, ran it on both external and internal gate setups (1.3 bar) and no issues at all. Awesome boost curves all day and very similar to the BLITZ SPEC R

If you don't mind spending the cash then go BLITZ SPEC R, if you want to get something just as good for half the price go a GiZZMO MS IBC

I have boost grapghs for the MS IBC if you wanna see :)

yeah we wanna see :)

i noticed there are 2 versions of the gizzmo. is there much difference?

gizzmo%20ibc.jpgGizzmo%20MS-ibc.jpg

Edited by Munkyb0y
  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Not to hijack or anything but its a good thing I read this thread first basically I'm on the market for one as well just got myself a PFC so I was just planning to get Apexi's PFC Boost Controller for convenience sake and i don't want another doo hickey on my dash, but because that uses the same solenoid as the AVCR I'm guessing that one is shit too?

Appreciate any advice guys.....

P.S. @Hamish...When is this Buller thing going through man???...Anyone up for duck meet next week?

Check this thread out: http://www.skylinesaustralia.com/forums/Dy...fc-t229928.html

Holy crap....thanks for the link abu, I just took my baby to Trent the other day...if I cant trust my own tuner who can I trust??? lol, Well I guess since PFC Boost Control and AVCR use the same solenoid AVCR is obviously out of the questoin....greattt... now I have to get a boost controller....another thing to put on my dash...

EDIT: Anyone know where to get Gizzmo IBC or a Profec for a decent price?

Holy crap....thanks for the link abu, I just took my baby to Trent the other day...if I cant trust my own tuner who can I trust??? lol, Well I guess since PFC Boost Control and AVCR use the same solenoid AVCR is obviously out of the questoin....greattt... now I have to get a boost controller....another thing to put on my dash...

EDIT: Anyone know where to get Gizzmo IBC or a Profec for a decent price?

yeah the silver is the previous model. but does anyone know if there's a performance difference between the two?
So if a new IBC is around 300-400, and an AVCR is aorund 700-800 (just quick price look up)

WHAT THE HELL ARE YOU PAYING FOR FOR AN AVCR?...is it made of gold???

lol probably for the brand name but I checked and it's certainly not made of gold :)

I got my MS IBC from modyourcar.com they usually run a special on them http://www.modyourcar.com.au/gizzmo-msibc-...ontroller-p5327

$299 at the moment + delivery which is decent, that's what I paid late last year for one. Also check with Trent because I know he can get them so he might be able to work out something for you incl installation and tune if your going through him

Not sure on the difference between the silver one and the black one, probably best to go to the GIZZMO site and compare the two. They have full specs on the GIZZMO site but when I asked Trent ages ago he specifically said get the black one (MSIBC) so I went with that

GIZZMO IBC (SILVER): http://www.gizzmoelectronics.com/Product_IBC.html

GIZZMO MS IBC (BlACK): http://www.gizzmoelectronics.com/Product_MSIBC.html

Man I should work for GIZZMO!!

AVCR is the best.

I got the PFC boost control kit that uses the same solinoid, the boost curve is flat at 20 PSI!

Get one, you wont look back.

:) You did look at the post Abu posted right?

Woww duudee....Why so serious......

All I'm saying is you got some dyno sheets to prove your case cause the way I see it AVCR has got some bad rep and Trent's dyno sheets prove just that...plus how can you justify the 3x price tag compared to something like the IBC?

yes, and it is common knowledge that the avcr is not a great ebc... and that you are again.... wrong

although in the year that i have known you on these forums i dont think i have EVER seen you listen to anyone's advice, so why would you start now?

srsly, you wannna be a productive member of these forums, you are on a fair bit and want people to help you.... here's some helpful advice... check your fkn racism at the door dipshit...

yes, and it is common knowledge that the avcr is not a great ebc... and that you are again.... wrong

although in the year that i have known you on these forums i dont think i have EVER seen you listen to anyone's advice, so why would you start now?

srsly, you wannna be a productive member of these forums, you are on a fair bit and want people to help you.... here's some helpful advice... check your fkn racism at the door dipshit...

Careful, I wouldn't get too lippy with me lad.

Woww duudee....Why so serious......

All I'm saying is you got some dyno sheets to prove your case cause the way I see it AVCR has got some bad rep and Trent's dyno sheets prove just that...plus how can you justify the 3x price tag compared to something like the IBC?

Why so serious?

As I said to you before, I am explaining to the fella that wanted advice on what setup I had, and how it worked (and it worked great).

Why the f**k would you write "did you not read abus article"?

Even if I read his article, it wouldn't change how my boost controller performed would it?

So why write it?

abu has had his experience, I've had mine.

Do you see my point yet considering my thorough explanation above?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...