Jump to content
SAU Community

R33 S2 Gts25t To Gtr

KwS
 Share

Recommended Posts

KwS Contributor

KwS

Posted
Posted (edited)

Okay, this is something i have been wondering, ever since i got my car. Its a 97 Series 2 GTS25T coupe. It was cheap, so im not about to go selling it to buy an R33 GTR, which still cost about 25-30k over here.

What i want to know, is if i imported a cheap 33 GTR donor car from jappas, could i essentually convert my car to be a GTR (without the wide rear guards, unless i want to cut and weld obviously)? I know it can be done on the likes of GTS4's, very easily, but a RWD 33?

I cant see why it wouldnt work, because the main differences are in the mechanicals, not the floor pan. So it still uses the same rear diff mounting, and driveshaft mountings. The main differences would be in having to swap the front subframe over to suit the 4wd system.

The wiring and interior arent an issue, as it would be a full donor car so i would just change the whole loom over.

If it can work, i could very well have a road registered GTR for 15-18k all up (including price of my GTS25T).

And yes, i know... it still wouldnt be a 'GTR'.... but i dont care.

Edited by KwS
Link to comment
https://www.sau.com.au/forums/topic/276237-r33-s2-gts25t-to-gtr/
Share on other sites
bozodos Grand Master

bozodos

Posted
Posted

Well I dunno about whether the GT-R box would physically fit into the GTS-T's trans tunnel for example? It sounds like another one of those things that isn't really worth the time or effort. I imagine you'd have to change all the suspension around too due to it now becoming front heavy...

KamikazeNinja34 Veteran

KamikazeNinja34

Posted
Posted
Okay, this is something i have been wondering, ever since i got my car. Its a 97 Series 2 GTS25T coupe. It was cheap, so im not about to go selling it to buy an R33 GTR, which still cost about 25-30k over here.

What i want to know, is if i imported a cheap 33 GTR donor car from jappas, could i essentually convert my car to be a GTR (without the wide rear guards, unless i want to cut and weld obviously)? I know it can be done on the likes of GTS4's, very easily, but a RWD 33?

I cant see why it wouldnt work, because the main differences are in the mechanicals, not the floor pan. So it still uses the same rear diff mounting, and driveshaft mountings. The main differences would be in having to swap the front subframe over to suit the 4wd system.

The wiring and interior arent an issue, as it would be a full donor car so i would just change the whole loom over.

If it can work, i could very well have a road registered GTR for 15-18k all up (including price of my GTS25T).

And yes, i know... it still wouldnt be a 'GTR'.... but i dont care.

My moral objections to what youre proposing aside...

'cheap donor car from japan'...a cheap 33 GTR even from japan is a stretch. Any GTR you could import from Japan for a cheap price (even with everyones dollar not being particularly strong)...for one, the engine is probably tired and not worth having anyway, and so on and so forth...If you want a GT-R...its probably worth just buying one. They are worth what theyre worth...even in Japan.

KamikazeNinja34 Veteran

KamikazeNinja34

Posted
Posted
Well I dunno about whether the GT-R box would physically fit into the GTS-T's trans tunnel for example? It sounds like another one of those things that isn't really worth the time or effort. I imagine you'd have to change all the suspension around too due to it now becoming front heavy...

And what he said ^

Theyre not exactly the same car. Ive seen an RB26 put into a GTST before and it required all sorts of engineering and stuff to make it work.

bozodos Grand Master

bozodos

Posted
Posted

Yeah theres a shitload of different little parts involved, I imagine you could strip the entire donor car, but then it kinda defeats the purpose of doing so unless you had some uber awesome body / interior to put it into lol. You'd be best off with a RWD RB26 :D

bozodos Grand Master

bozodos

Posted
Posted

Much easier in a R32 though - you've already got 5stud and turbo brakes + ATTESSA already in there, all you needa do is change the loom + wiring, could probably get away with original Gbox too.

There's still a lot of minor differences, like the bonnet, suspension mounting, diff, driveshaft (I think), and a whole bunch of the suspension components. You also don't have the pumped guards.

eeiko321 Experienced

eeiko321

Posted
Posted
You want to put in a RB26DETT in your R33 GTS-T?

Gearbox, drivetrain, 4WD System... everything..?

yes the PUMPED guards are very very very very very very very very very very very very very very very very very very very very very very very very very IMPORTANT !!!!!!!!!!!!!!!!!!!!!!

LOL

thats what makes it a GT-R!!!!!!!!!!!!!!!

KwS Contributor

KwS

Posted
  • Author
Posted
Much easier in a R32 though - you've already got 5stud and turbo brakes + ATTESSA already in there, all you needa do is change the loom + wiring, could probably get away with original Gbox too.

There's still a lot of minor differences, like the bonnet, suspension mounting, diff, driveshaft (I think), and a whole bunch of the suspension components. You also don't have the pumped guards.

My 33 still has turbo brakes, and 5 stud, being the 25T and all.

I do, actually think its in the too hard basket now.... better off saving the money i would've used for the conversion, converting my car to manual, selling it, and then i should have enough to buy a genuine GTR in the first place.

Just thinking of all the stuff that needs to be transplanted, like the attessa hoses etc. The wiring isnt too bad, but i bet there isnt mounting holes etc for the g sensor and other little gtr specific bits.

The trans tunnel could very well be bigger on a GTR too, seeing as the rear guards are different, that means that anything else in the shell could be different too.

Would've been a cool project though.

Still, if anyone has been it done before, im still interested to know if its possible.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
correct.

its gets done in R32s, but havent seen it done in a 33

Much easier in a R32 though - you've already got 5stud and turbo brakes + ATTESSA already in there, all you needa do is change the loom + wiring, could probably get away with original Gbox too.

There's still a lot of minor differences, like the bonnet, suspension mounting, diff, driveshaft (I think), and a whole bunch of the suspension components. You also don't have the pumped guards.

How do you mean much easier in a R32? R33 came with RB26DETT's as well...

SAU member DSTROY has done a RB26 conversion in his R32 GTS-4 (GTS-T with 4WD), so it is basically a R32 GTR but in a R32 GTS-T body.

The conversion can be done but a lot of time and effort will be needed + Cash!

yes the PUMPED guards are very very very very very very very very very very very very very very very very very very very very very very very very very IMPORTANT !!!!!!!!!!!!!!!!!!!!!!

LOL

thats what makes it a GT-R!!!!!!!!!!!!!!!

LMAO!

eeiko321 is at it again!

:)

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • perry_r33
      Skyline R33 Sedan Tail Lights S2 - (2 SETS Available) Silver & Grey

      By perry_r33 · Posted

      Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • GTSBoy
      First time Skyline owner

      By GTSBoy · Posted

      Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...