Jump to content
SAU Community

Recommended Posts

I have someone interested in my car. But the person either seems 12 years old, or trying to suss out the adress of where I hold the car.

some emails:

cust (exact spelling):

i wanna knwo more abt this car

me:

sure mate, what would you like to know?

cust:

does it have a clean title?

me:

what do you mean by clean title? havnt heard that term before..?

cust:

has it been hit or something before?

me:

no known crash history. im first owner is oz. the crack by the tailight is from when I attempted a 2 door rear conversion.

if you'd like to see the car let me know and we can arrange a time.

cust:

ok that is fine give me a time so i can test drive it???

cust:

let me know what time can come to see the car cuz i am a nissan skyline fan big time!!

the last 2 replys, one before I could reply to the previous, has got me a bit concerned that this person is just trying to find out where I keep the car.

what do you guys think? I am taking extra precautions due to recent break ins etc happening with cars for sale, or due to be on sale soon, ie kelvin's gtr etc.

Link to comment
https://www.sau.com.au/forums/topic/276750-dodgey-for-sale-enquiry/
Share on other sites

Here's some tips for getting rid of tyre-kickers, dreamers and other idiots and possible thieves-

1 unless you have good reason, never divulge rego details (not even a rego number in a pic), and if arranging an inspection ask a mate/relative to use his address as meeting point - insist only one max 2 persons comes to see car

2 most important point : tell them they only get to see the car when you see proof they have funds to purchase (i.e. they can show you a bank checque (a current finance company car loan approval doc may substitute for bank checque but try for the former) for an amount close to or equal to the asking or agreed sale price if you have discussed one over phone - you should try to get a ball park agreement on a figure - if they don't like the car they of course re-bank their bank checque)

3 do not relent on the proof of funds requirement - if they are genuine they will have the readies and not be offended, if they are just wanting a joy-ride exercise they will refuse to prove they have any funds

3 get them to go to the address but do not go there with the car if they don't have the bank checque (your mate relative can ask to see it and phone you while you wait close by) - no checque no see car!

4 they got the checque, show em the car but not the rego papers until they hand over the checque as your address is on the papers

5 make sure checque is OK by phoning the bank if you have any doubts

6 with nternet enquiries never reveal any info about yourself that may assist a thief or scammer - apply same procedures as 1-5

At the end of the day, you need to sort the timewasters and dreamers and thieves from genuine buyers - dont get desperate, better to sell via uaction or trade-in if needing another car for peace of mind.

NEXT thing to note - the biggest wankers are detectable by the fact the ask a zillion questions and often contact you relentlessly - all froth and bubble and excitement but no substance - from actual experience selling cars privately from time to time I find that the REAL buyer does not call/sms/email over and over again

But Mr Gray over cautious approach seems to be a good recipe for not getting robbed.

+1, BUT

too much over caution also says what are you hiding about the history of the car.

Personally, i would not give you a cheque without rego details so i can do REVS check etc.

i recently purchased another Skyline and the bloke was real good. Let me see details so i could do my research, at my cost took it to my mechanic for a check over etc. But if he was trying to block by wanting money before inspection then i would walk as to me he wants a sale without due diligence.

+1, BUT

too much over caution also says what are you hiding about the history of the car.

Personally, i would not give you a cheque without rego details so i can do REVS check etc.

i recently purchased another Skyline and the bloke was real good. Let me see details so i could do my research, at my cost took it to my mechanic for a check over etc. But if he was trying to block by wanting money before inspection then i would walk as to me he wants a sale without due diligence.

====================

my bad, could have put more details in but kept it short - of course when he shows he actually can pay you go thru the usual - REVS check mechanical inspection and answer all enq with the bloke - its sorting out the dreamers that just want to go for a drive in your car for entertainment that points 1-4 are designed to do

REVS is based on Chassis+VIN NO more than rego so even at that stage you can still keep your address somewhat secure

like i said after all if they guy doesn't want to buy - he can re-bank his checque so you goota be fair and give him a good opportunity for to do all his diligence

its just that don't be feeling as a seller you have no rights - you do!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...