Jump to content
SAU Community

Recommended Posts

hi guys

car was wreaked by some idiot that ran a stop sign :) now i have all the goodies laying around!

RB25DET NEO with gearbox, wiring loom stock computer and stock turbo (no injectors) 80,000km $5000

Trust Tdo6 25g turbo-kit comes with manifold, turbo 48mm trust external gate with screamer pipe, all stainless cooler pipes, braided lines, turbo beanie, trust foam pod and dump pipe (was slightly bent in the crash) only 7000km old zero shaft play

$5000

680cc sard injectors (top feed) 7000km old $900

nismo 2way diff 5 bolt suits R34 or S15 4000km old $1200

Nismo twin plate clutch with light weight flywheel 7000km old $1200

splitfire coilpacks suit NEO 20,000km old $550

bride race seat with rail to suit R32 gtr or R34 excellent condiction $500

Z32 afm $250

walbrow intank fuel pump $150

r34 greddy pillar holds 2 60mm gauges $130

r34 adjustable lower control arm fronts 500km old $140

R34 strut bar $100

stock intercooler $50

stock r34 NA rims 150

r34 stock seats full set $200

after market radiator $200

some Pricers are slightly negotiable but any low ballers will be laughed at.

this is good stuff first persion with the money in hand gets the item i will only hold an item if deposit is taken.

Have fun

pm me or call/text me on 0433708054 Please not in the middel of the night

parts are in Wa and i am happy to post at buyers expence for some of the items

cheers

Ryan

pic will be up soon

Link to comment
https://www.sau.com.au/forums/topic/276762-450hp-r34-neo-goodies/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

no sms received but i am happy to send radiator

clutch is still between the motor and gear box hope to separate some time this week

motor is for sale as a hole but if you find a buyer for the bottom end i will separate

Edited by sickr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...