Jump to content
SAU Community

Recommended Posts

  • Replies 477
  • Created
  • Last Reply

Top Posters In This Topic

Not sure what turbos the Hi Octane 34 runs but im pretty sure it runs a AWD RB30

yeah its an rb30: http://hioctaneracing.com.au/news_RB30.html

your signature is a crack up & i bet some people really believe this as well HAHA

  • 5 months later...

quick update guys - i decided to upgrade my n1 oil pump to the nitto oil pump as it wasn't up for the task.

greg @ proengines also made a custom collar to better suit the oil pump.

i'll be taking the gtr to crd hopefully this sat for a quick health check :happy:

  • 2 weeks later...

hi guys,

just did a road test in a back street & recorded the results on my blitz ebc (rob @ rips got me thinking on this):

3rd gear: 1bar boost @ 3800rpm

4th gear: 1bar boost @ 3500rpm

5th gear: didn't have the room but would 'guesstimate' 1bar boost @ 3200rpm

mr rob ward, your t04z setup which makes 1bar boost @ 3000rpm, what gear is this done in?

i should also note that my setup has been tuned for top end power, im sure if i asked jim @ crd to tune for mid range my revs would come down even lower @ 1bar boost...

regards,

marko

i dont think you could beat the stock extrude honed manifolds...especially if they are black coated.

Yo dirty man, do you think it's worth the extra money for a set of aftermarket low mount manifolds- compared to a set of honed and ported N1 manifolds?

I'd like to keep the N1's (I have them all done allready) but if there are reasonable gains to be had I'll ditch them... I don't want the ex-mani's to be the restriction.

I know you were running aftermarket manifolds with the GT-RS's.

2.8, head, cams, greddy plenum and 50mm tb's, GT-RS's....

Cheers

Justin

There needs to be a 2.8 section...

i think i can answer on pauls behalf as ive had this coversation with him in the past...stock manifolds are much more reliable & just as good if not better than aftermarket items.

mark with his hi octane gtr was using tomei manifolds then went back to stock ones which were matched & honed for better response, as per his interview on ignition dvd

Thanks marko.

Yeah, I'm really trying to stick with cast manifolds. I'd hate to have to change manifolds after a few thousand km's because one cracked... unfun job.

I've run 400rwkw with stock-stock manifolds in the past... un ported, honed or coated.

I seem to ask Paulie alot of qn's because he's run good numbers with GT-RS's... I'll be running GT-RS's on the new stroker motor.

Anywho... thanks for the reply.

Cheers

Justin

Yo dirty man, do you think it's worth the extra money for a set of aftermarket low mount manifolds- compared to a set of honed and ported N1 manifolds?

I'd like to keep the N1's (I have them all done allready) but if there are reasonable gains to be had I'll ditch them... I don't want the ex-mani's to be the restriction.

I know you were running aftermarket manifolds with the GT-RS's.

2.8, head, cams, greddy plenum and 50mm tb's, GT-RS's....

Cheers

Justin

There needs to be a 2.8 section...

No...spend it somewhere else

  • 1 month later...

hi guys,

i have ordered a new set of splitfire coilpacks as my factory coilpacks started to misfire. tell tale sign was that 1 of plugs was very dark (thanks for the guidancec paul).

whilst im doing this i looked at my plugs...i am currently running ngk pfr7a (1.1 gap) & have done 1000km with them. should i just clean them (with petrol & toothbrush) or should i replace them as they did clean up well.

my tuner recommended i go with pfr7b platinum if i update them - the problem is that nobody in sydney stocks 7b's let alone 7a's! this is head fark & a 1/2 :D why is it sooo hard to buy a set of plugs???

hi guys,

i have ordered a new set of splitfire coilpacks as my factory coilpacks started to misfire. tell tale sign was that 1 of plugs was very dark (thanks for the guidancec paul).

whilst im doing this i looked at my plugs...i am currently running ngk pfr7a (1.1 gap) & have done 1000km with them. should i just clean them (with petrol & toothbrush) or should i replace them as they did clean up well.

my tuner recommended i go with pfr7b platinum if i update them - the problem is that nobody in sydney stocks 7b's let alone 7a's! this is head fark & a 1/2 :D why is it sooo hard to buy a set of plugs???

bcpr7es marko...made better spark and more power with these puppies than any platinum plug you care to name. I run coppers in the race car too...but not 7's.

invest in other mods such as alcohol

Baah... Alcohol is for drinking

Gasoline is for washing parts and

Nitro is for racing!!! ha ha ha

Yeah, I was thinking about methanol a while ago, but it really dosn't go with my street car build. Also E85 isn't available in Tas, so I stuck with the ID1000's instead of the ID2000's...

bcpr7es marko...made better spark and more power with these puppies than any platinum plug you care to name. I run coppers in the race car too...but not 7's.

Oki doki paul. Better spending $20 on a set rather than $150, its a win win solution

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...