Jump to content
SAU Community

Recommended Posts

Remember decat is illegal for the street, and its expensive if you get caught. Cant remember which state it was but someone posted about a $4500 fine recently. Besides which it makes the pollution from you car much worse, so you've got to be a bit of a prick to run one...

Oh I always thought you'd have to be an insane idiot to actually run bare pipe without even the pretense of a cat shell lol.

BTW the EPA tester the other night could tell my cat was empty from listening to it, they do give things a bit more of a barkm not to mention a hard to describe sound of the turbo spooling.

haha well with an RB25, hollow cat and no mufflers I got an average of 110db and a max of 128, but you get used to the noise and its only at random times like when you're driving down an alley or being emissions tested you realise 'oh dear thats loud as fark', fyi I'm going to go stealthy exhaust route now (at least most of the time lol)

I put a decat on my x-force system. Hardly noticed any sound difference at all.

you got to find it to fine it. You always get a chance to replace with a cat before they look at it even if this so called 4.5-10k fine exists.

OK.Did the decat pipe experiment.Noticed a little increase in performance.The exhaust note was maybe 5 decibels louder but had an awesome throaty sound when on boost,absolutely loved it.Did notice how noxious the fumes were though,so after 2 days of driving i put the cat back on.I've decided instead of getting rid of the cat i'm going to get rid of the mid muffler.The kakimoto exhaust i have has the big oval muffler at the back and between that and the mid muffler i can hardly hear the exhaust!Cheers for all the input and replies fellas.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...