Jump to content
SAU Community

Howling Noise, Something Doesn't Seem Happy...

SS8_Gohan
 Share

Recommended Posts

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

Hi guys'n'gals

I have this elusive howling noise that i just can't seem to get rid off... and it seems to be doing funny things.

The main problem is that it doesn't seem to howl on the dyno anymore (where it use to) and you can't tell or it's harder to hear it when on the dyno, as opposed to in the car on the road. This is annoying, as we can't really check something when it's just not there (dyno)

On the street, the howl builds as boost builds and if you really give it some stick, something seems to "give" or "let go" before rev limit. Like a muffled whump, as if perhaps something is blowing off... but doesn't :D Hard to explain. First time it happened, i was thinking "that must be what it sounds like when a cooler hose blows off, etc", but everything is fine and in one piece :huh:

Ok, now the weird thing, one day was at the tuners, a loose hose was spotted, fitted it more tightly, tightened clamp and i went to take a test drive. The difference this time around is that i had removed the front bumper in case we needed to get access to the FMIC. When i took the car for a drive, without the front bumper it did not howl at all :D I'm like sweet, that loose hose must have been it, and we're all good. Get back, chuck the bumper back on, drive home and you guessed it... howl is back.

The front bumper has a fair whack of room around it on the inside, so it doesn't seem to be pushing up against anything,etc but i can't explain why no bumper would make any difference.

The other weird thing is that it won't howl on the dyno anymore, just on the road, which again, doesn't make much sense to me. (It has howled on the dyno before, but was easily audible)

It's near impossible for the tuner to fix because the only want to test/fix it is when it's on the dyno, but it won't howl on the dyno. Can't fix something that's not really there to begin with.

I'm trying to get the car ready for a track day on Saturday, but i'm not taking the car out as is as i'm concerned something might just blow up/off, it's a horrible sound.

Oh, and i've got a stock BOV, but i've noticed when you really give it some stick, and the howl ends up with that muffled "whump", the BOV sounds like a damn chapel st spec HKS, it's like sututututu... :blink: :blink: "sutututu" from a stock BOV?? Was under the impression that is a bad sound for the turbo...

I'll try and get to the tuners tomorrow, but would welcome any thoughts :)

cheers,

daniel

kwickr33 Community Regular

kwickr33

Posted
Posted (edited)

Well I guess when the car's not moving you don't get air travel through the bumper so it won't make any noise. I guess its not some thing to worry about. You should get a proper BOV before hitting the tracks.

Edited by kwickr33
SS8_Gohan Grand Master

SS8_Gohan

Posted
  • Author
Posted

it has howled on the dyno before, and i'm pretty sure it's not just air passing through the bumper because the noise is dependent on your right foot, not speed, if that makes sense. ie, i could cruise at 100km/hr and not hear anything, but put my foot down, wait for boost to build and it will make itself apparent.

that and i'll rack up the 'warnings' on my boost controller when it happens, and get 'peak warnings' when i get that muffled whump sound. Almost certain it's a boost related issue, as opposed to air around the bumper (which has never been an issue until we've started upping the power/boost on the car)

is there a certain level that the stock BOV out lives its usefulness? i thought it was fine for some fairly decent power

shaunvlc Enthusiast

shaunvlc

Posted
Posted

i have the same issue. but only because i removed my AFM to my intercooler piping to allow me to get a custom intake made up without the hassles of mounting an afm then filter. Im uncertain what the noise is but it is a slight howling sound, sounds like not enough air flow is making it to the intake or something. hard to explain.

SS8_Gohan Grand Master

SS8_Gohan

Posted
  • Author
Posted

wouldn't know how to check for manifold/gasket leaks

howl can get pretty damn loud and wouldn't have the foggiest about the belts

trying to get the car ready for a track day tomorrow, but just don't want to chance it...

went for a drive with bumper off, howl is there.

Came back, fiddled with and tightened up the pipe the tuner spotted one time (i think it's slowly working it's way loose) went for a drive, seem to have gone.

Bumper back on, went for a drive... doesn't seem like it's there. Let it cool, to come back and check pipe again...

Checked pipe, looks to not have moved... went for a drive, howly mc howl howl again - come back, completely loosen pipe/clamp, shove in, tighten up.

Go for a drive, slightly better but not my boost controller is beeping at me which i guess means something is spiking a bit and my BOV is still thinking it's on chapel st.

so combo of BOV and howl, going to have to skip the track day tomorrow :)

at what power/torque would we be expecting the BOV to give up?

toddlls Proficient

toddlls

Posted
Posted

I have had a howling/screaming when on high boost/revs for a while too, have just been fitting some extra goodies around exhaust section & noticed loose bolts on exhaust manifold, maybe worth a check on yours too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • tridentt150v
      S A U N S W Club Membership

      By tridentt150v · Posted

      Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Bit of a similar question, apprently with epoxy primer you can just sand the panel to 240 grit then apply it and put body filler on top. So does that basically mean you almost never have to go to bare metal for simple dents?
    • luke gtr
      Did tie rods. Steering now not "springing" back.

      By luke gtr · Posted

      Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • luke gtr
      Returning after a long time!

      By luke gtr · Posted

      I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
×
×
  • Create New...