Jump to content
SAU Community

Recommended Posts

Hi all,

I have some HID kits left over from a group buy that need to go.

H1 6000k (R33 GTST)

H1 8000k (R33 GTST)

H4 6000k

H4 4300k

HB3 8000k

(IS200 low and high beam)

HB4 8000k

H11 4300k

D2S 6000k

All kits are $180 Delivered. $19 cheaper than GB price.

I also have a kit that i made up from spare bulbs and ballasts: H4 4300k $100 (one ballast was used for a month, still in perfect working order)

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/277558-left-over-hid-kits/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

HID works best with projector lights as the beam pattern is focused.

HID works with all bulb types.

Are you sure your car has H4?

I thought 32s had either H1 or H3?

HID works best with projector lights as the beam pattern is focused.

HID works with all bulb types.

Are you sure your car has H4?

I thought 32s had either H1 or H3?

i have N1 headlights which uses h4, previously had projector ones which had h3c

which brand are these???

Mostly VEGA DIAMOND, some BOSCH.

i have N1 headlights which uses h4, previously had projector ones which had h3c

OK no problem. Just to let you know these are single beam kits and do not do high beam.

If there is anyone who has put HIDd into the N1 headlights please shed some light as to what kit you have out in?

hey mate, do the 6000k H1 also direct fit for 34 gtt? or they use different harness?

edit: also are these the bosch/philips ones?

Edited by .:: GimpS-R34 ::.

hey mate im keen to buy a set

i have a 34gtt

and it doesnt have xeon lights anymore coz they got taken out when they complied it i think

do u have any kits for me?

and how much extra for some led parkers?

thanks heaps mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...