Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering if any one is aware of a decent body kit supplier who sells quality kits. I've looked at a number of websites and even ebay and i've come up with full kits for around the $600 mark.

Have kits really come down this much within the last couple of years or is it the quality... I would have expected to pay a minimum of around $1000 for an R33 kit... a mate paid $1200 for an R32 kit so im just curious...

any help would be greatly appreciated

Link to comment
https://www.sau.com.au/forums/topic/277772-decent-body-kit-supplier/
Share on other sites

R33 kits aren't exactly rare seeing as how it's the most common skyline ... so if I were you, I'd just keep a close eye on the for sale section and get a genuine/plastic kit .. quality will always be better than any fibreglass copies and not much more expensive either.

R33 kits aren't exactly rare seeing as how it's the most common skyline ... so if I were you, I'd just keep a close eye on the for sale section and get a genuine/plastic kit .. quality will always be better than any fibreglass copies and not much more expensive either.

cheers thanks for your help guys

You can definately pick up kits for $600 from places but they dont always fit properly and can need alot more work...geuine kits like Trust/Do-Luck etc...cost more but are better quality unless they are cheap replicas

There are various reasons for bodykits varying in price from the cheap to the uber expensive. First of all, price is NEVER a good indicator of the quality.

The manufacturing costs of bodykits vary depending on the location, the material used, location of manufacture and the marketing spin. As with any big Japanese brands you will pay for the name along with paying for the part. So don't fall into the trap that just because it has a label that a) its a genuine item and b) that it will fit like a glove. I have worked with both and have been surprised by both on numerous occasions.

You also have to remember that the cars a lot of these kits are going on are at least 5-10 years old. With age comes tolerance differences from general driving and minor accidents ("but my car has never been in a crash", I hear you say. A few questions for you. Have you owned the car from new? Do you think someone buys a brand new sports car and drives it only to church on Sundays? Do you think all repairs are visible? etc.)

Also material chose is one to be careful of too. Although fibreglass cannot absorb the amount of shock plastic (polyurethane) can, it is easy to repair and customise if required.

I would bank on pretty much ANY bodykit needing some massaging to get a good fit, as every car is different and will have a slightly different fit.

Do your research and find a reputable company that you have confidence with and will take the time to go through your concerns.

Yes we do sell bodykits, however this information is merely a guide for those looking. We understand there are many and varied reasons on who you will chose to buy a kit from, however as we are keen car nuts ourselves we want to equip everyone with the knowledge to make a good decision so that making your car look the way you want it an enjoyable time not a painful experience.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...