Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering if any one is aware of a decent body kit supplier who sells quality kits. I've looked at a number of websites and even ebay and i've come up with full kits for around the $600 mark.

Have kits really come down this much within the last couple of years or is it the quality... I would have expected to pay a minimum of around $1000 for an R33 kit... a mate paid $1200 for an R32 kit so im just curious...

any help would be greatly appreciated

Link to comment
https://www.sau.com.au/forums/topic/277772-decent-body-kit-supplier/
Share on other sites

R33 kits aren't exactly rare seeing as how it's the most common skyline ... so if I were you, I'd just keep a close eye on the for sale section and get a genuine/plastic kit .. quality will always be better than any fibreglass copies and not much more expensive either.

R33 kits aren't exactly rare seeing as how it's the most common skyline ... so if I were you, I'd just keep a close eye on the for sale section and get a genuine/plastic kit .. quality will always be better than any fibreglass copies and not much more expensive either.

cheers thanks for your help guys

You can definately pick up kits for $600 from places but they dont always fit properly and can need alot more work...geuine kits like Trust/Do-Luck etc...cost more but are better quality unless they are cheap replicas

There are various reasons for bodykits varying in price from the cheap to the uber expensive. First of all, price is NEVER a good indicator of the quality.

The manufacturing costs of bodykits vary depending on the location, the material used, location of manufacture and the marketing spin. As with any big Japanese brands you will pay for the name along with paying for the part. So don't fall into the trap that just because it has a label that a) its a genuine item and b) that it will fit like a glove. I have worked with both and have been surprised by both on numerous occasions.

You also have to remember that the cars a lot of these kits are going on are at least 5-10 years old. With age comes tolerance differences from general driving and minor accidents ("but my car has never been in a crash", I hear you say. A few questions for you. Have you owned the car from new? Do you think someone buys a brand new sports car and drives it only to church on Sundays? Do you think all repairs are visible? etc.)

Also material chose is one to be careful of too. Although fibreglass cannot absorb the amount of shock plastic (polyurethane) can, it is easy to repair and customise if required.

I would bank on pretty much ANY bodykit needing some massaging to get a good fit, as every car is different and will have a slightly different fit.

Do your research and find a reputable company that you have confidence with and will take the time to go through your concerns.

Yes we do sell bodykits, however this information is merely a guide for those looking. We understand there are many and varied reasons on who you will chose to buy a kit from, however as we are keen car nuts ourselves we want to equip everyone with the knowledge to make a good decision so that making your car look the way you want it an enjoyable time not a painful experience.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...