Jump to content
SAU Community

Recommended Posts

First of all I was saying. If I start my car an put it in drive an slide it cross to tiptronic mode it would show 3rd gear but I have even move the car yet. I though it would suppose to be in 1st gear while stationary without moving the car. I need some direct injectors. Any body possible know where I could find it for the vq25dd v35 250gt skyline 2003. I have one leak direct injecting cause my car to run rich

Any body possible know where I could find it for the vq25dd v35 250gt skyline 2003. I have one leak direct injecting cause my car to run rich

Honestly, I don't know why, but you don't seem to be interested in listening to the advice you've been given in this forum. You're obviously well out of your depth. Your lack of gratitude for those that have helped, and inability to string a legible sentence together doesn't help.

Good luck. You're going to need a lot of it.

I have tried every diagnostic advice from many of you which cause ms spend alot of money. Seems that none of the advice is working. Yall have access to these cars, parts and other items that can assisted yall with ur car problems. These vq25dd are not familiar to were am live an for every advice I get possible it makes me spend money an nothing works. All am asking is a website that sell injectors for these cause because there is one cylinder that making the spark plug have a dry foul on it an that cylinder smell like fuel

Were I live everything GA a be order an shipped here. Parts are not available for these vq25dd an yall advice made me spend more money an these people who diagnosis the car stating no codes at all. About this one cylinder that causing a rich running engine misfire. It just one cylinder which I meet a bit of fuel left inside so I was suspecting leaking fuel injector.

So it's all our fault then? Where do you live? You haven't told us, and I didn't see anything in your profile.

I think you've been advised to get your injectors tested multiple times, but I don't think you've taken this advice. Unless you do, I'll bet this will end up in tears.

Edited by Spong

It just one cylinder which I meet a bit of fuel left inside so I was suspecting leaking fuel injector.

But this is a DD engine.. so an injector that isn't closing fully isn't just going to have a 'run rich' issues like a non-direct injected engine.. you are going to end up with combustion pressures forcing their way through the leaking injector, back into the fuel rail and causing major issues overall, not just a fouled spark plug and poor economy.

I live in the Bahamas. I change alot of plugs an everytime I change it. I get a misfire an its the same cylinder that causing it. An not it is the coils causing it

Why aren't the coils causing it?

Edited by Ben C34

First of all I was saying. If I start my car an put it in drive an slide it cross to tiptronic mode it would show 3rd gear but I have even move the car yet. I though it would suppose to be in 1st gear while stationary without moving the car.

It only shows the highest gear you are allowing your gearbox to reach. The actual gear is not related to the display

They brand new Nissan coils from Nissan Japan. OEM

So?

Have you tried swapping coils to see if the problem cylinder moves?

Who says your wiring is all good?

I would be checking that before messing with the injectors. But it's your call. Up until now this site has wasted your money.

Edited by Ben C34

Everything yall saying I have test. I have already swap coils an plugs an problem still exist. I meet a little bit of fuel in that cylinder that causing the misfire. Then other five dry. Time to swap injectors to see if the problem persist in another cylinder

You can order a minimum of five, and still be cheaper than factory.

Your looking at 330AUD each for genuine ones...

They might not be of the same quality however.

Up to you to take the choice.

I live in the Bahamas. I change alot of plugs an everytime I change it. I get a misfire an its the same cylinder that causing it. An not it is the coils causing it

What plugs are you running, obviously not the correct quad earth's, they are impossible to find.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...