Jump to content
SAU Community

Recommended Posts

ive just booked out a tuning arvo at ahg, has anyone else done one of these? i cant seem to get much info from ahg

what can i expect, do they just let you get out there and drive or is it more like a driver training?

any info would be great so me and my mates get the most out of it

Cheers

Link to comment
https://www.sau.com.au/forums/topic/278051-tuning-arvo/
Share on other sites

The Tuning event is usually on there little circuit and does not include any driver training or instructors, but they will keep an eye on you to make sure that you don't do silly things. They are a good event to do once you have recieved some driver training, but I'm sure you'll have fun regardless. Whilst the track looks really simply, there are a few interesting technicalities.

Link to comment
https://www.sau.com.au/forums/topic/278051-tuning-arvo/#findComment-4699996
Share on other sites

  • 1 month later...

Well had the track day yesterday and all i can say is im booking another one on monday, :(

Weather was crap but had soo much fun, they are changing the tuning arvo slightly so that there is a little more driver training involved, seating and hand position, race lines and just answering general questions.

We got to use the the main track, 2 or 3 laps then swap over. And we also got to have a go at the skid pan which showed us all how bad we really are at driving in the wet lol, with 10 people there wasn't much waiting in line to get on either of the tracks.

Would highly recommend it to anyone. :P

Link to comment
https://www.sau.com.au/forums/topic/278051-tuning-arvo/#findComment-4769823
Share on other sites

the guy we had was awsome, said drive within your abilities. He let us have some fun but also helped us get better as the day went on. the only thing he said was no hand brake drifts and if you spin out dont just keep spinning your tyres, one guy got banned from the track at the end for doing a burnout.

Link to comment
https://www.sau.com.au/forums/topic/278051-tuning-arvo/#findComment-4770129
Share on other sites

hey, we had the tuning day on the thursday and it was p*sing down. it showed up every little handling fault and driver fault. although it was good fun bouncing on the limiter in 3rd gear. they told my work mate to leave after his exhaust fell off his bridge ported RX6. apparently it was all the ladies in the office could hear lol

Link to comment
https://www.sau.com.au/forums/topic/278051-tuning-arvo/#findComment-4771189
Share on other sites

they are changing the tuning arvo slightly so that there is a little more driver training involved, seating and hand position, race lines and just answering general questions.

We got to use the the main track, 2 or 3 laps then swap over. And we also got to have a go at the skid pan which showed us all how bad we really are at driving in the wet lol, with 10 people there wasn't much waiting in line to get on either of the tracks.

Would highly recommend it to anyone. :D

Glad to hear that there is some additional input from the instructors, as they have alot of valuable information to impart :D

Yep, they are great fun :down:

Link to comment
https://www.sau.com.au/forums/topic/278051-tuning-arvo/#findComment-4771419
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...